6 open source boards using the MGA-81563-TR1G
Real designs built with the MGA-81563-TR1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00
How designs wire the MGA-81563-TR1G
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MGA-81563-TR1G connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The OUT pin has a inductor on 5 of 5 designs, most often 10 µH.
- The OUT pin has a series capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 4, 5 | Connected to: GND 100% | — |
| INpin 3 | Connected to: Signal 100% |
|
| OUTpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${TITLE} by Josephrp, HackRf-Circuit-Board-KiCad by GitByKaliMeNope, ${TITLE} by greearb and ${TITLE} by JensLiu.
The MGA-81563-TR1G in open source designs
The gallery holds 6 open source boards using the MGA-81563-TR1G from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is Illacceptanything by illacceptanything.
Parts used alongside the MGA-81563-TR1G
Microcontrollers on boards using the MGA-81563-TR1G
What boards using the MGA-81563-TR1G are built for
MGA-81563-TR1G: common questions
Where can I find a MGA-81563-TR1G reference design?
Each of the 6 boards on this page is a real design using the MGA-81563-TR1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MGA-81563-TR1G IN pin connected?
The IN pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MGA-81563-TR1G.
How is the MGA-81563-TR1G OUT pin connected?
The OUT pin has a inductor on 5 of 5 designs, most often 10 µH. Counted from the KiCad layouts of 5 open source designs using the MGA-81563-TR1G.
What parts are used alongside the MGA-81563-TR1G?
The DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551, RFFC5072TR7 and SKY13317-373LF appear in the most repositories here.
Which microcontrollers do boards using the MGA-81563-TR1G use?
Most are built on NXP (6).
How big is a typical board using the MGA-81563-TR1G?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the MGA-81563-TR1G?
By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.
Can I simulate one of these boards using the MGA-81563-TR1G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.