8 open source boards using the SKY13317-373LF
Real designs built with the SKY13317-373LF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01TI MSP430/CC
Beagleconnect freedom
beagleboard
35.8 × 58 mm176 parts4LCC-BY-4.01TI MSP430/CC
Cicada-WiSUN-HW
EnAccess
40 × 65 mm93 parts4LNo license0NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00
How designs wire the SKY13317-373LF
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SKY13317-373LF connects to, and the resistors, capacitors and other passives placed on it.
- The RFC pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 pF).
- The RF1 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 100 pF).
- The RF2 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 100 pF).
- The V1 pin has a capacitor to GND on 5 of 7 designs, most often 33 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 0 | Connected to: GND 100% | — |
| RFCpin 1 | Connected to: Signal 100% |
|
| NCpin 2 | Connected to: Not connected 100% | — |
| V1pin 3 | Connected to: The microcontroller 100%, a connector 71% |
|
| RF1pin 4 | Connected to: Signal 100% |
|
| RF2pin 5 | Connected to: Signal 100% |
|
| V2pin 6 | Connected to: The microcontroller 100%, SKY13453-385LF 71%, a connector 71% |
|
| V3pin 7 | Connected to: The microcontroller 86%, a connector 71% |
|
| RF3pin 8 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${TITLE} by Josephrp, Beagleconnect freedom by beagleboard, HackRf-Circuit-Board-KiCad by GitByKaliMeNope and ${TITLE} by greearb.
The SKY13317-373LF in open source designs
The gallery holds 8 open source boards using the SKY13317-373LF from 8 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Illacceptanything by illacceptanything.
Parts used alongside the SKY13317-373LF
Microcontrollers on boards using the SKY13317-373LF
What boards using the SKY13317-373LF are built for
SKY13317-373LF: common questions
Where can I find a SKY13317-373LF reference design?
Each of the 8 boards on this page is a real design using the SKY13317-373LF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SKY13317-373LF RFC pin connected?
The RFC pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 pF). Counted from the KiCad layouts of 7 open source designs using the SKY13317-373LF.
How is the SKY13317-373LF RF1 pin connected?
The RF1 pin has a series capacitor on 7 of 7 designs, most often 22 pF (then 100 pF). Counted from the KiCad layouts of 7 open source designs using the SKY13317-373LF.
How is the SKY13317-373LF RF2 pin connected?
The RF2 pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 7 open source designs using the SKY13317-373LF.
What parts are used alongside the SKY13317-373LF?
The DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551, MGA-81563-TR1G and RFFC5072TR7 appear in the most repositories here.
Which microcontrollers do boards using the SKY13317-373LF use?
Most are built on NXP (6) and TI MSP430/CC (2).
How big is a typical board using the SKY13317-373LF?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the SKY13317-373LF?
By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.
Can I simulate one of these boards using the SKY13317-373LF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.