9 open source boards using the DRV8870DDAR

Real designs built with the DRV8870DDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the DRV8870DDAR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DRV8870DDAR connects to, and the resistors, capacitors and other passives placed on it.

  • The VM pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 100 µF).
  • The ISEN pin has a resistor to GND on 4 of 5 designs, most often 330 mΩ (then 33 mΩ).
  • The VREF pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 1 µF).
  • The VREF pin has a pull-up to 5V on 2 of 5 designs, most often 200 Ω (then 4.7 kΩ).
GNDpin 1, 9Connected to: GND 100%
VREFpin 4Connected to: Signal 60% · 3.3V 40%
  • Capacitor to GND on 60% · 100 nF (1), 1 µF (1)
  • Pull-up to 5V on 40% · 200 Ω (1), 4.7 kΩ (1)
VMpin 5Connected to: 12V 100%
  • Decoupling capacitor on 80% · 100 nF (5), 100 µF (1), 1 µF (1)
ISENpin 7Connected to: Signal 80% · GND 20%
  • Resistor to GND on 80% · 330 mΩ (1), 33 mΩ (1), 100 mΩ (1)
  • Series resistor on 40% · 1 kΩ (1), 15 kΩ (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Split flap by DrewFerg11, Bulma by eesakiii, XCS-03A-MAIN by hedong2023 and BDCMotorControlBoard by nunosousa.

The DRV8870DDAR in open source designs

The gallery holds 9 open source boards using the DRV8870DDAR from 6 GitHub repositories; a typical one measures about 105 × 63 mm and carries around 87 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Filament-Guillotine by Zephino.

Microcontrollers on boards using the DRV8870DDAR

What boards using the DRV8870DDAR are built for

DRV8870DDAR: common questions

Where can I find a DRV8870DDAR reference design?

Each of the 9 boards on this page is a real design using the DRV8870DDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the DRV8870DDAR VM pin?

The VM pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 5 open source designs using the DRV8870DDAR.

What resistor goes on the DRV8870DDAR ISEN pin?

The ISEN pin has a resistor to GND on 4 of 5 designs, most often 330 mΩ (then 33 mΩ). Counted from the KiCad layouts of 5 open source designs using the DRV8870DDAR.

How is the DRV8870DDAR VREF pin connected?

The VREF pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the DRV8870DDAR.

What parts are used alongside the DRV8870DDAR?

The AMS1117-3.3, INA180A1IDBVR, RP2040, SN65HVD230DR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the DRV8870DDAR use?

Most are built on STM32 (3), RP2040/RP2350 (2), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the DRV8870DDAR?

The median is 105 × 63 mm, and 50% are two-layer designs.

What is the most popular open source board using the DRV8870DDAR?

By GitHub stars, Filament-Guillotine by Zephino, with 2 stars.

Can I simulate one of these boards using the DRV8870DDAR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part