23 open source boards using the 74HC573
Real designs built with the 74HC573, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Relatively-Universal-ROM-Programmer
AndersBNielsen
68.8 × 53.6 mm141 parts2LGPL-3.0256Cpu board
rjw57
99.1 × 99.1 mm68 parts2LMIT68Minimax8085
skiselev
100 × 80 mm44 parts2LGPL-3.0606502 Blinkenlights Card
acwright
100 × 57.6 mm73 parts2LCERN-OHL-P-2.047- schematic only · 56 parts
Intel8088OnBreadboard
sladorsoft
56 partsNo license41 AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.012Z280
transistorfet
100 × 115 mm55 parts4LGPL-3.01165c816-pcbs
erikarn
306.6 × 168.1 mm66 parts4LNo license2Mini8085
schenkmi
100 × 80 mm44 parts2LNo license2Steuereinheit
stonedDiscord
259.7 × 80 mm236 parts2LNo license0AVR/Arduino
Multicartridge smd-32u4-front dipswitch
ifilot
80 × 100 mm72 parts2LNo license0- schematic only · 42 parts
COSMAC controller
quantalume
42 partsNo license0 CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.06Sus
stonedDiscord
175.3 × 80.6 mm83 parts2LBSD-2-Clause5AVR/Arduino
Computer
rjw57
99.1 × 99.1 mm35 parts2LNo license0Combined
rjw57
195.4 × 188 mm26 parts2LMIT68Sd
Noah1989
160 × 100 mm45 parts2LMIT2Rosario
zuiko21
97.8 × 72.4 mm39 parts2LMIT23Busmaster
Noah1989
160 × 100 mm33 parts2LMIT26502 RAM Card
acwright
100 × 57.6 mm15 parts2LCERN-OHL-P-2.047Cft front panel-20190912-all modules
alexiosc
99.7 × 143.4 mm122 parts2LGPL-3.06Spi
scefrom
135.9 × 53.3 mm45 parts2LCustom license2Ps2mkb
clydeshaffer
120 × 98 mm26 parts2LNo license146
How designs wire the 74HC573
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 74HC573 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Relatively-Universal-ROM-Programmer by AndersBNielsen, Ps2mkb by clydeshaffer, Combined by rjw57 and Minimax8085 by skiselev.
The 74HC573 in open source designs
The gallery holds 23 open source boards using the 74HC573 from 19 GitHub repositories; a typical one measures about 100 × 99.1 mm and carries around 55 components.
90% are two-layer designs, the rest use four layers or more, and 61% carry an open source license.
The most starred is Relatively-Universal-ROM-Programmer by AndersBNielsen.
Parts used alongside the 74HC573
Microcontrollers on boards using the 74HC573
What boards using the 74HC573 are built for
74HC573: common questions
Where can I find a 74HC573 reference design?
Each of the 23 boards on this page is a real design using the 74HC573. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC573 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF. Counted from the KiCad layouts of 17 open source designs using the 74HC573.
What parts are used alongside the 74HC573?
The 74HC138, 74HC00, 74HC32, 74HC04 and 74HC245 appear in the most repositories here.
Which microcontrollers do boards using the 74HC573 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74HC573?
The median is 100 × 99.1 mm, and 90% are two-layer designs.
What is the most popular open source board using the 74HC573?
By GitHub stars, Relatively-Universal-ROM-Programmer by AndersBNielsen, with 256 stars.
Can I simulate one of these boards using the 74HC573 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.