8 open source boards using the ESP32-S2-WROOM
Real designs built with the ESP32-S2-WROOM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Franzininho-WIFI-dev edition
Franzininho
51.1 × 30 mm29 partsNo license39ESP32
Franzininho-WiFi
Franzininho
64.3 × 25.4 mm32 parts2LNo license24ESP32
OkayCAN
jglim
64.8 × 41 mm32 parts2LMIT24ESP32
Nissan-Leaf-Gen-3-Adapter-Board
jrbe
131.6 × 104.1 mm72 parts4LGPL-3.08ESP32
Ei O T
mayermakes
44.6 × 105.4 mm14 parts2LGPL-3.08ESP32
Esp32-s2
hggh
40.4 × 33.8 mm31 parts2LGPL-3.06ESP32
ESP32S2 DevBoard
blagojenikolic91
31.8 × 65.4 mm29 parts2LNo license6ESP32
ESP32-S2 DEV
hwreverse
27.9 × 88.9 mm32 parts2LMIT13
How designs wire the ESP32-S2-WROOM
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ESP32-S2-WROOM connects to, and the resistors, capacitors and other passives placed on it.
- The EN pins have a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
- The EN pins have a capacitor to GND on 7 of 8 designs, most often 1 µF (then 100 nF).
- The VDD pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF).
- The IO4 pin is tied to GND on 7 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 2 | Connected to: 3.3V 100% |
|
| ENpin 3, 41 | Connected to: A connector 20% |
|
| SDO/SD0pin 21 | Connected to: A connector 50% · not connected 25% |
|
| SDI/SD1pin 22 | Connected to: A connector 50% · not connected 25% |
|
| IO15pin 23 | Connected to: A connector 50% · not connected 25% |
|
| IO4pin 26 | Connected to: GND 88% | — |
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Franzininho-WIFI-dev edition by Franzininho, Franzininho-WiFi by Franzininho, OkayCAN by jglim and ESP32-S2 DEV by hwreverse.
The ESP32-S2-WROOM in open source designs
The gallery holds 8 open source boards using the ESP32-S2-WROOM from 8 GitHub repositories; a typical one measures about 47.9 × 53.2 mm and carries around 32 components.
86% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Franzininho-WIFI-dev edition by Franzininho.
Parts used alongside the ESP32-S2-WROOM
Microcontrollers on boards using the ESP32-S2-WROOM
What boards using the ESP32-S2-WROOM are built for
ESP32-S2-WROOM: common questions
Where can I find a ESP32-S2-WROOM reference design?
Each of the 8 boards on this page is a real design using the ESP32-S2-WROOM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S2-WROOM EN pin?
The EN pins have a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the ESP32-S2-WROOM.
What decoupling capacitors do designs use on the ESP32-S2-WROOM VDD pin?
The VDD pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the ESP32-S2-WROOM.
How is the ESP32-S2-WROOM IO4 pin connected?
The IO4 pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-S2-WROOM.
Which microcontrollers do boards using the ESP32-S2-WROOM use?
Most are built on ESP32 (8).
How big is a typical board using the ESP32-S2-WROOM?
The median is 47.9 × 53.2 mm, and 86% are two-layer designs.
What is the most popular open source board using the ESP32-S2-WROOM?
By GitHub stars, Franzininho-WIFI-dev edition by Franzininho, with 39 stars.
Can I simulate one of these boards using the ESP32-S2-WROOM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.