2 open source boards using the FE1.1s(SSOP-28)

Real designs built with the FE1.1s(SSOP-28), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The FE1.1s(SSOP-28) in open source designs

The gallery holds 2 open source boards using the FE1.1s(SSOP-28) from 1 GitHub repository; a typical one measures about 60 × 90 mm and carries around 329 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is ESP32-P4-PC Rev C by OLIMEX.

Microcontrollers on boards using the FE1.1s(SSOP-28)

ESP32 2

What boards using the FE1.1s(SSOP-28) are built for

FE1.1s(SSOP-28): common questions

Where can I find a FE1.1s(SSOP-28) reference design?

Each of the 2 boards on this page is a real design using the FE1.1s(SSOP-28). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the FE1.1s(SSOP-28) use?

Most are built on ESP32 (2).

How big is a typical board using the FE1.1s(SSOP-28)?

The median is 60 × 90 mm, and 0% are two-layer designs.

What is the most popular open source board using the FE1.1s(SSOP-28)?

By GitHub stars, ESP32-P4-PC Rev C by OLIMEX, with 33 stars.

Can I simulate one of these boards using the FE1.1s(SSOP-28) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.