7 open source boards using the TPS2116
Real designs built with the TPS2116, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-P4-PC Rev B
OLIMEX
60 × 90 mm329 parts4LMIT33PICO-EVB
OLIMEX
100 × 70 mm91 parts2LMIT13FPGA
Eth4k hardware
theta-machines
98 × 58 mm132 parts4LCERN-OHL-W-2.04STM32
SDM-24 Data Logger
sundevilmotorsports
101 × 75 mm110 parts4LNo license2ESP32
Agon extender
bgates747
60 × 90 mm329 parts4LGPL-3.01ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0ESP32
ESP32-P4-PC Rev C
OLIMEX
60 × 90 mm329 parts4LMIT33
How designs wire the TPS2116
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS2116 connects to, and the resistors, capacitors and other passives placed on it.
- The PR1 pin has a resistor to GND on 6 of 6 designs, most often 6.81 kΩ (then 100 kΩ).
- The VOUT pins have a decoupling capacitor on 5 of 6 designs, most often 47 µF (then 100 nF).
- The VIN1 pin has a decoupling capacitor on 5 of 6 designs, most often 47 µF (then 100 nF).
- The VIN2 pin has a decoupling capacitor on 5 of 6 designs, most often 47 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOUTpin 2, 7 | Connected to: 5V 100% |
|
| VIN1pin 3 | Connected to: 5V 50% · a signal 50% |
|
| PR1pin 4 | Connected to: Signal 100% |
|
| VIN2pin 6 | Connected to: 5V 83% · a signal 17% |
|
| STpin 8 | Connected to: Not connected 67% · a signal 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-P4-PC Rev B by OLIMEX, PICO-EVB by OLIMEX, Eth4k hardware by theta-machines and SDM-24 Data Logger by sundevilmotorsports.
The TPS2116 in open source designs
The gallery holds 7 open source boards using the TPS2116 from 6 GitHub repositories; a typical one measures about 98 × 80 mm and carries around 151 components.
86% use four copper layers or more, and 71% carry an open source license.
The most starred is ESP32-P4-PC Rev B by OLIMEX.
Parts used alongside the TPS2116
What boards using the TPS2116 are built for
TPS2116: common questions
Where can I find a TPS2116 reference design?
Each of the 7 boards on this page is a real design using the TPS2116. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS2116 PR1 pin?
The PR1 pin has a resistor to GND on 6 of 6 designs, most often 6.81 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the TPS2116.
What decoupling capacitors do designs use on the TPS2116 VOUT pin?
The VOUT pins have a decoupling capacitor on 5 of 6 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TPS2116.
What decoupling capacitors do designs use on the TPS2116 VIN1 pin?
The VIN1 pin has a decoupling capacitor on 5 of 6 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TPS2116.
What parts are used alongside the TPS2116?
The CH217K(SOT23-6L), ES8311(QFN-20), ESP32-P4NRWxx(QFN104), FE1.1s(SSOP-28) and IP101GRR(32-PIN_QFN) appear in the most repositories here.
Which microcontrollers do boards using the TPS2116 use?
Most are built on ESP32 (4), FPGA (1) and STM32 (1).
How big is a typical board using the TPS2116?
The median is 98 × 80 mm, and 14% are two-layer designs.
What is the most popular open source board using the TPS2116?
By GitHub stars, ESP32-P4-PC Rev B by OLIMEX, with 33 stars.
Can I simulate one of these boards using the TPS2116 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.