8 open source boards using the CH217K(SOT23-6L)
Real designs built with the CH217K(SOT23-6L), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-P4-PC Rev B
OLIMEX
60 × 90 mm329 parts4LMIT33RP2040/RP2350
RP2350pc
OLIMEX
85 × 65 mm287 parts4LNo license27USB-NeoHub
OLIMEX
46 × 33.5 mm27 parts2LGPL-3.016RP2040/RP2350
RP2040pc
OLIMEX
80 × 65 mm159 parts4LMIT11RP2040/RP2350
Neo6502PC-CPU
OLIMEX
54 × 124 mm116 parts4LGPL-3.011ESP32
Agon extender
bgates747
60 × 90 mm329 parts4LGPL-3.01RP2040/RP2350
PCE colorlight carrier
supermomo31
180 × 160 mm253 parts4LNo license0ESP32
ESP32-P4-PC Rev C
OLIMEX
60 × 90 mm329 parts4LMIT33
How designs wire the CH217K(SOT23-6L)
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CH217K(SOT23-6L) connects to, and the resistors, capacitors and other passives placed on it.
- The ISET pin has a resistor to GND on 7 of 7 designs, most often 49.9 kΩ (then 30.1 kΩ).
- The VIN pin has a decoupling capacitor on 6 of 7 designs, most often 47 µF.
- The VOUT pin has a decoupling capacitor on 5 of 7 designs, most often 47 µF.
- The FLAG# pin has a series resistor on 3 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: 5V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FLAG#pin 3 | Connected to: FE1.1s(SSOP-28) 43%, CH334S(SSOP-28) 43% |
|
| EN#pin 4 | Connected to: FE1.1s(SSOP-28) 43%, CH334S(SSOP-28) 43% |
|
| ISETpin 5 | Connected to: Signal 100% |
|
| VINpin 6 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-P4-PC Rev B by OLIMEX, RP2350pc by OLIMEX, USB-NeoHub by OLIMEX and Neo6502PC-CPU by OLIMEX.
The CH217K(SOT23-6L) in open source designs
The gallery holds 8 open source boards using the CH217K(SOT23-6L) from 7 GitHub repositories; a typical one measures about 60 × 90 mm and carries around 270 components.
88% use four copper layers or more, and 75% carry an open source license.
The most starred is ESP32-P4-PC Rev B by OLIMEX.
Parts used alongside the CH217K(SOT23-6L)
Microcontrollers on boards using the CH217K(SOT23-6L)
What boards using the CH217K(SOT23-6L) are built for
CH217K(SOT23-6L): common questions
Where can I find a CH217K(SOT23-6L) reference design?
Each of the 8 boards on this page is a real design using the CH217K(SOT23-6L). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the CH217K(SOT23-6L) ISET pin?
The ISET pin has a resistor to GND on 7 of 7 designs, most often 49.9 kΩ (then 30.1 kΩ). Counted from the KiCad layouts of 7 open source designs using the CH217K(SOT23-6L).
What decoupling capacitors do designs use on the CH217K(SOT23-6L) VIN pin?
The VIN pin has a decoupling capacitor on 6 of 7 designs, most often 47 µF. Counted from the KiCad layouts of 7 open source designs using the CH217K(SOT23-6L).
What decoupling capacitors do designs use on the CH217K(SOT23-6L) VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 7 designs, most often 47 µF. Counted from the KiCad layouts of 7 open source designs using the CH217K(SOT23-6L).
What parts are used alongside the CH217K(SOT23-6L)?
The MT3608(SOT23-6), TPS62A02ADRLR(SOT-563-6), CH334S(SSOP-28), ES8311(QFN-20) and FE1.1s(SSOP-28) appear in the most repositories here.
Which microcontrollers do boards using the CH217K(SOT23-6L) use?
Most are built on RP2040/RP2350 (4) and ESP32 (3).
How big is a typical board using the CH217K(SOT23-6L)?
The median is 60 × 90 mm, and 13% are two-layer designs.
What is the most popular open source board using the CH217K(SOT23-6L)?
By GitHub stars, ESP32-P4-PC Rev B by OLIMEX, with 33 stars.
Can I simulate one of these boards using the CH217K(SOT23-6L) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.