8 open source boards using the GAL20V8
Real designs built with the GAL20V8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24TTL-to-RGB
hkzlab
47 × 62.2 mm31 parts4LCC-BY-NC-4.02016up
SukkoPera
60.8 × 85 mm19 parts2LNo license11SoundX
SukkoPera
60.8 × 100 mm44 parts2LNo license8Hannes512
SukkoPera
54.3 × 72.2 mm24 parts2LNo license8Gide
felge1966
94.6 × 94.6 mm32 parts2LNo license0MUTIF09 Single Board Computer
ja1umi
155 × 114 mm68 parts2LMIT10
How designs wire the GAL20V8
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the GAL20V8 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 5V 100% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include We816 by danwerner21, Plusd by alvaroalea, TTL-to-RGB by hkzlab and 16up by SukkoPera.
The GAL20V8 in open source designs
The gallery holds 8 open source boards using the GAL20V8 from 8 GitHub repositories; a typical one measures about 77.7 × 96.8 mm and carries around 38 components.
88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is We816 by danwerner21.
What boards using the GAL20V8 are built for
GAL20V8: common questions
Where can I find a GAL20V8 reference design?
Each of the 8 boards on this page is a real design using the GAL20V8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the GAL20V8 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the GAL20V8.
What parts are used alongside the GAL20V8?
The 74HCT74, 74LS244, GAL16V8 and MC6850 appear in the most repositories here.
How big is a typical board using the GAL20V8?
The median is 77.7 × 96.8 mm, and 88% are two-layer designs.
What is the most popular open source board using the GAL20V8?
By GitHub stars, We816 by danwerner21, with 32 stars.
Can I simulate one of these boards using the GAL20V8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.