2 open source boards using the H5TQ4G63AFR
Real designs built with the H5TQ4G63AFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAIO-SDR
rishivg
99.4 × 60 mm309 parts8LCERN-OHL-S-2.010
FPGAIO SDR 1.1
SunnyYoshimitsu
91.5 × 91.5 mm268 parts6LNo license3
The H5TQ4G63AFR in open source designs
The gallery holds 2 open source boards using the H5TQ4G63AFR from 2 GitHub repositories; a typical one measures about 95.5 × 75.7 mm and carries around 289 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is IO-SDR by rishivg.
Parts used alongside the H5TQ4G63AFR
Microcontrollers on boards using the H5TQ4G63AFR
What boards using the H5TQ4G63AFR are built for
H5TQ4G63AFR: common questions
Where can I find a H5TQ4G63AFR reference design?
Each of the 2 boards on this page is a real design using the H5TQ4G63AFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the H5TQ4G63AFR?
The BNO085, MS5611-01BA, MX25U1635EZNI-10G, RT9193-33B and SY6280AAC appear in the most repositories here.
Which microcontrollers do boards using the H5TQ4G63AFR use?
Most are built on FPGA (2).
How big is a typical board using the H5TQ4G63AFR?
The median is 95.5 × 75.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the H5TQ4G63AFR?
By GitHub stars, IO-SDR by rishivg, with 10 stars.
Can I simulate one of these boards using the H5TQ4G63AFR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.