7 open source boards using the ice5lp4k_sg48

Real designs built with the ice5lp4k_sg48, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ice5lp4k_sg48

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ice5lp4k_sg48 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCIO_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
  • The VCC pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The CDONE pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.2 kΩ.
  • The CRESET_B pin has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ.
VCCIO_2pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7)
IOB_6Apin 2Connected to: A connector 50%
  • Series resistor on 33% · 33 Ω (1)
IOB_9Bpin 3Connected to: A connector 50%
  • Series resistor on 33% · 33 Ω (1)
IOB_8Apin 4Connected to: A connector 50%
  • Series resistor on 33% · 33 Ω (1)
VCCpin 5, 30Connected to: 1.2V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (14), 1 µF (4), 10 nF (3)
CDONEpin 7Connected to: A connector 50%, the microcontroller 33%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (6)
CRESET_Bpin 8Connected to: A connector 67%, the microcontroller 33%
  • Pull-up to 3.3V on 100% · 10 kΩ (6)
IOB_16Apin 9Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 33 Ω (1), 68 Ω (1)
IOB_18Apin 10Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 33 Ω (1), 100 Ω (1), 68 Ω (1)
IOB_20Apin 11Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 33 Ω (1), 1.5 kΩ (1)
IOB_24Apin 13Connected to: A connector 50%
  • Pull-up to 3.3V on 50% · 10 kΩ (2), 100 Ω (1)
IOB_34A_SPI_SCKpin 15Connected to: A connector 67%, the microcontroller 33%
  • Pull-up to 3.3V on 33% · 100 Ω (1), 10 kΩ (1)
IOB_31Bpin 18Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 33 Ω (1)
IOB_29Bpin 19Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 33 Ω (1)
IOB_25B_G3pin 20Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 33 Ω (1)
IOB_23Bpin 21Connected to: A connector 67% · not connected 17%
  • Series resistor on 33% · 33 Ω (1)
SPI_VCCIO1pin 22Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (14)
VPP_2V5pin 24Connected to: 3.3V 50% · a signal 50%
  • Decoupling capacitor on 100% · 100 nF (12)
VCCPLLpin 29Connected to: VCCPLL 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (6), 10 µF (6)
IOT_42Bpin 31Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOT_43Apin 32Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
VCCIO_0pin 33Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (10), 4.7 µF (1)
IOT_48Bpin 36Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOT_50Bpin 38Connected to: A connector 50%
  • Series resistor on 50% · 33 Ω (1), 22 Ω (1)
IOT_51Apin 42Connected to: A connector 50%
  • Series resistor on 50% · 33 Ω (1), 22 Ω (1)
IOT_49Apin 43Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 33 Ω (1)
IOB_3B_G6pin 44Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOB_5Apin 45Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOB_0Apin 46Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOB_2Apin 47Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
IOB_4Apin 48Connected to: A connector 67%
  • Series resistor on 33% · 33 Ω (1)
GNDpin 49Connected to: GND 100%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICE-V-Wireless by ICE-V-Wireless, ESP32C3 FPGA by emeb, Dspod up5k by emeb and Up5k usb by emeb.

The ice5lp4k_sg48 in open source designs

The gallery holds 7 open source boards using the ice5lp4k_sg48 from 6 GitHub repositories; a typical one measures about 62 × 31.8 mm and carries around 78 components.

71% use four copper layers or more, and 71% carry an open source license.

The most starred is ICE-V-Wireless by ICE-V-Wireless.

Microcontrollers on boards using the ice5lp4k_sg48

What boards using the ice5lp4k_sg48 are built for

ice5lp4k_sg48: common questions

Where can I find a ice5lp4k_sg48 reference design?

Each of the 7 boards on this page is a real design using the ice5lp4k_sg48. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ice5lp4k_sg48 VCCIO_2 pin?

The VCCIO_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the ice5lp4k_sg48.

What decoupling capacitors do designs use on the ice5lp4k_sg48 VCC pin?

The VCC pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ice5lp4k_sg48.

What pull-up resistor is used on the ice5lp4k_sg48 CDONE pin?

The CDONE pin has a pull-up to 3.3V on 6 of 6 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 6 open source designs using the ice5lp4k_sg48.

What parts are used alongside the ice5lp4k_sg48?

The 12MHz, MCP1824x-OT, XC6222B331MR-G, DRTR5V0U4S and LY68L6400 appear in the most repositories here.

Which microcontrollers do boards using the ice5lp4k_sg48 use?

Most are built on FPGA (5) and ESP32 (2).

How big is a typical board using the ice5lp4k_sg48?

The median is 62 × 31.8 mm, and 29% are two-layer designs.

What is the most popular open source board using the ice5lp4k_sg48?

By GitHub stars, ICE-V-Wireless by ICE-V-Wireless, with 82 stars.

Can I simulate one of these boards using the ice5lp4k_sg48 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part