10 open source boards using the XC6222B331MR-G
Real designs built with the XC6222B331MR-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ICE-V-Wireless
ICE-V-Wireless
81.7 × 31.8 mm78 parts4LMIT82ESP32
ESP32C3 FPGA
emeb
76.2 × 31.8 mm85 parts4LMIT16RISC-V
Dspod cv1800b
emeb
26.4 × 41.7 mm93 parts4LMIT10STM32
Cheep4
emeb
38.1 × 100 mm115 parts4LMIT3ESP32
PintApple
camielverdult
40 × 40 mm36 parts2LNo license1FPGA
Dspod up5k
emeb
26.4 × 41.7 mm63 parts4LMIT10STM32
Dspod h7r3
emeb
26.4 × 41.7 mm58 parts4LMIT10RP2040/RP2350
Dspod rp2350
emeb
26.4 × 41.7 mm56 parts4LMIT10STM32
Dspod u3c5
emeb
26.4 × 41.7 mm49 parts4LMIT10ESP32
Dspod esp32s3
emeb
26.4 × 41.7 mm48 parts4LMIT10
How designs wire the XC6222B331MR-G
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the XC6222B331MR-G connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF).
- The CE pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 4V 80% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| CEpin 3 | Connected to: 3.3V 60% · a signal 40% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICE-V-Wireless by ICE-V-Wireless, ESP32C3 FPGA by emeb, Dspod cv1800b by emeb and Cheep4 by emeb.
The XC6222B331MR-G in open source designs
The gallery holds 10 open source boards using the XC6222B331MR-G from 5 GitHub repositories; a typical one measures about 26.4 × 41.7 mm and carries around 61 components.
90% use four copper layers or more, and 90% carry an open source license.
The most starred is ICE-V-Wireless by ICE-V-Wireless.
Parts used alongside the XC6222B331MR-G
Microcontrollers on boards using the XC6222B331MR-G
What boards using the XC6222B331MR-G are built for
XC6222B331MR-G: common questions
Where can I find a XC6222B331MR-G reference design?
Each of the 10 boards on this page is a real design using the XC6222B331MR-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6222B331MR-G VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the XC6222B331MR-G.
What decoupling capacitors do designs use on the XC6222B331MR-G VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the XC6222B331MR-G.
How is the XC6222B331MR-G CE pin connected?
The CE pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the XC6222B331MR-G.
What parts are used alongside the XC6222B331MR-G?
The 12MHz, ice5lp4k_sg48, MCP1824x-OT, APS6404L-3SQR-SN and DRTR5V0U4S appear in the most repositories here.
Which microcontrollers do boards using the XC6222B331MR-G use?
Most are built on ESP32 (4), STM32 (3), FPGA (1) and RISC-V (1).
How big is a typical board using the XC6222B331MR-G?
The median is 26.4 × 41.7 mm, and 10% are two-layer designs.
What is the most popular open source board using the XC6222B331MR-G?
By GitHub stars, ICE-V-Wireless by ICE-V-Wireless, with 82 stars.
Can I simulate one of these boards using the XC6222B331MR-G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.