7 open source boards using the LPC4337JBD144
Real designs built with the LPC4337JBD144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Dc power supply
dc-power-supply
130 × 265.4 mm221 parts2LNo license29NXP
Equipo AVL - vRaptor
brengi
120 × 80 mm160 parts2LNo license7NXP
Edu ciaa nxp
AndyPecotche
85.8 × 137 mm183 parts2LBSD-3-Clause0NXP
Edu ciaa nxp
AndyPecotche
85.8 × 137 mm183 parts2LNo license0NXP
Edu ciaa nxp micropython
lmtreser
85.8 × 137 mm183 parts2LMIT0ESP8266
Proyecto TD2(con 4337)
nvargas24
80 × 75.2 mm74 parts2LNo license0ESP8266
Proyecto TD2(con 4337) 2.0
nvargas24
91.4 × 116.6 mm74 parts2LNo license0
How designs wire the LPC4337JBD144
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LPC4337JBD144 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 12 has a crystal on 6 of 6 designs, most often 12 MHz.
- Pin 12 has a capacitor to GND on 6 of 6 designs, most often 20 pF (then 27 pF).
- Pin 13 has a crystal on 6 of 6 designs, most often 12 MHz.
- Pin 13 has a capacitor to GND on 6 of 6 designs, most often 20 pF (then 27 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Signal 83% · not connected 17% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 5 | Connected to: 3.3V 100% |
|
| Pin 6 | Connected to: Signal 67% · not connected 33% |
|
| Pin 12 | Connected to: Signal 100% |
|
| Pin 13 | Connected to: Signal 100% |
|
| Pin 14 | Connected to: Not connected 100% | — |
| Pin 16 | Connected to: Signal 83% · not connected 17% |
|
| Pin 17 | Connected to: Signal 83% · not connected 17% |
|
| Pin 18 | Connected to: PRTR5V0U2X 50% · not connected 33% |
|
| Pin 19 | Connected to: Signal 83% · not connected 17% |
|
| Pin 20 | Connected to: PRTR5V0U2X 50% · not connected 33% |
|
| Pin 21 | Connected to: MIC2025 50%, PRTR5V0U2X 50% · not connected 33% |
|
| Pin 23 | Connected to: Signal 83% · not connected 17% |
|
| Pin 24 | Connected to: Signal 67% · not connected 33% |
|
| Pin 25 | Connected to: 3.3V 100% |
|
| Pin 28 | Connected to: Signal 100% |
|
| Pin 29 | Connected to: Signal 83% · not connected 17% |
|
| Pin 36 | Connected to: 3.3V 100% |
|
| Pin 37 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 38 | Connected to: Signal 100% |
|
| Pin 39 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 40 | Connected to: GND 100% | — |
| Pin 41 | Connected to: 3.3V 100% |
|
| Pin 42 | Connected to: Signal 100% |
|
| Pin 43 | Connected to: Signal 83% · not connected 17% |
|
| Pin 45 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 46 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 49 | Connected to: Signal 83% · not connected 17% |
|
| Pin 50 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 51 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 52 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 53 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 54 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 55 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 56 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 57 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 58 | Connected to: Not connected 83% · a signal 17% | — |
| Pin 59 | Connected to: 3.3V 100% |
|
| Pin 60 | Connected to: Not connected 83% · a signal 17% | — |
104 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dc power supply by dc-power-supply, Equipo AVL - vRaptor by brengi, Edu ciaa nxp by AndyPecotche and Edu ciaa nxp by AndyPecotche.
The LPC4337JBD144 in open source designs
The gallery holds 7 open source boards using the LPC4337JBD144 from 6 GitHub repositories; a typical one measures about 85.8 × 137 mm and carries around 183 components.
100% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Dc power supply by dc-power-supply.
Parts used alongside the LPC4337JBD144
What boards using the LPC4337JBD144 are built for
LPC4337JBD144: common questions
Where can I find a LPC4337JBD144 reference design?
Each of the 7 boards on this page is a real design using the LPC4337JBD144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LPC4337JBD144 pin 12 connected?
Pin 12 has a crystal on 6 of 6 designs, most often 12 MHz. Counted from the KiCad layouts of 6 open source designs using the LPC4337JBD144.
How is the LPC4337JBD144 pin 13 connected?
Pin 13 has a crystal on 6 of 6 designs, most often 12 MHz. Counted from the KiCad layouts of 6 open source designs using the LPC4337JBD144.
What pull-up resistor is used on the LPC4337JBD144 pin 28?
Pin 28 has a pull-up to 3.3V on 6 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the LPC4337JBD144.
What parts are used alongside the LPC4337JBD144?
The NCP1117ST33T3G, 93C46, FT2232H, MIC2025 and PRTR5V0U2X appear in the most repositories here.
Which microcontrollers do boards using the LPC4337JBD144 use?
Most are built on NXP (5) and ESP8266 (2).
How big is a typical board using the LPC4337JBD144?
The median is 85.8 × 137 mm, and 100% are two-layer designs.
What is the most popular open source board using the LPC4337JBD144?
By GitHub stars, Dc power supply by dc-power-supply, with 29 stars.
Can I simulate one of these boards using the LPC4337JBD144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.