9 open source boards using the TXB0108
Real designs built with the TXB0108, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Icezum
FPGAwars
68.6 × 53.3 mm208 parts4LGPL-3.0356STM32
Motor Card-V1
robotronik
140 × 60 mm94 parts2LNo license1NXP
Edu ciaa nxp
AndyPecotche
85.8 × 137 mm183 parts2LNo license0NXP
Edu ciaa nxp
AndyPecotche
85.8 × 137 mm183 parts2LBSD-3-Clause0NXP
Edu ciaa nxp micropython
lmtreser
85.8 × 137 mm183 parts2LMIT0Amiga gfxcard old
mntmn
171.2 × 72.9 mm32 parts2LNo license1.0kAmiga gfxcard before pour
mntmn
171.2 × 72.9 mm20 parts2LNo license1.0kHarp.breakout.mini clamp
AllenNeuralDynamics
40 × 75 mm10 parts2LNo license0STM32
Forge-Probe: Silicon Backdoor Debug Probe
jayis1
37 × 23 mm11 parts4LNo license3
How designs wire the TXB0108
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TXB0108 connects to, and the resistors, capacitors and other passives placed on it.
- The B8 pin is tied to GND on 6 of 8 designs.
- The A2 pin is tied to 3.3V on 5 of 8 designs (a signal on 2).
- The B2 pin is tied to 3.3V on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A2pin 2 | Connected to: 3.3V 63% · a signal 25% | — |
| A6pin 8 | Connected to: A connector 25%, the microcontroller 25% |
|
| A7pin 9 | Connected to: A connector 38%, the microcontroller 38% |
|
| A8pin 10 | Connected to: Signal 50% · 3.3V 25% |
|
| B8pin 11 | Connected to: GND 75% | — |
| B7pin 12 | Connected to: A connector 50% |
|
| B6pin 13 | Connected to: A connector 50% |
|
| B5pin 14 | Connected to: A connector 38% |
|
| GNDpin 15 | Connected to: A connector 25% |
|
| B2pin 19 | Connected to: 3.3V 63% · a signal 38% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga gfxcard before pour by mntmn, Icezum by FPGAwars, Forge-Probe: Silicon Backdoor Debug Probe by jayis1 and Motor Card-V1 by robotronik.
The TXB0108 in open source designs
The gallery holds 9 open source boards using the TXB0108 from 8 GitHub repositories; a typical one measures about 85.8 × 72.9 mm and carries around 94 components.
78% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Amiga gfxcard old by mntmn.
Parts used alongside the TXB0108
What boards using the TXB0108 are built for
TXB0108: common questions
Where can I find a TXB0108 reference design?
Each of the 9 boards on this page is a real design using the TXB0108. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TXB0108 B8 pin connected?
The B8 pin is tied to GND on 6 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TXB0108.
How is the TXB0108 A2 pin connected?
The A2 pin is tied to 3.3V on 5 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the TXB0108.
How is the TXB0108 B2 pin connected?
The B2 pin is tied to 3.3V on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the TXB0108.
What parts are used alongside the TXB0108?
The FT2232H, 93C46, LPC4337JBD144, MIC2025 and NCP1117ST33T3G appear in the most repositories here.
Which microcontrollers do boards using the TXB0108 use?
Most are built on NXP (3), STM32 (2) and FPGA (1).
How big is a typical board using the TXB0108?
The median is 85.8 × 72.9 mm, and 78% are two-layer designs.
What is the most popular open source board using the TXB0108?
By GitHub stars, Amiga gfxcard old by mntmn, with 1,020 stars.
Can I simulate one of these boards using the TXB0108 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.