6 open source boards using the LXES1TBCC2-004

Real designs built with the LXES1TBCC2-004, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the LXES1TBCC2-004

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LXES1TBCC2-004 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 5 of 5 designs, most often 0 Ω.
  • Pin 3 has a series resistor on 5 of 5 designs, most often 0 Ω.
  • Pin 0 is left unconnected on 5 of 5 designs.
  • Pin 2 is tied to GND on 5 of 5 designs.
Pin 0Connected to: Not connected 100%
Pin 1Connected to: A connector 100%
  • Series resistor on 100% · 0 Ω (5)
Pin 2Connected to: GND 100%
Pin 3Connected to: A connector 100%
  • Series resistor on 100% · 0 Ω (5)
Pin 4Connected to: Not connected 100%
Pin 5Connected to: VBUS 100%
  • Ferrite bead on 100%
Pin 6Connected to: Not connected 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Marzipan by Josephrp, Noob sdr by ainnovators, Marzipan by greearb and Marzipan by JensLiu.

The LXES1TBCC2-004 in open source designs

The gallery holds 6 open source boards using the LXES1TBCC2-004 from 6 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.

83% carry an open source license.

The most starred is Illacceptanything by illacceptanything.

Microcontrollers on boards using the LXES1TBCC2-004

What boards using the LXES1TBCC2-004 are built for

LXES1TBCC2-004: common questions

Where can I find a LXES1TBCC2-004 reference design?

Each of the 6 boards on this page is a real design using the LXES1TBCC2-004. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LXES1TBCC2-004 pin 1?

Pin 1 has a series resistor on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the LXES1TBCC2-004.

What resistor goes on the LXES1TBCC2-004 pin 3?

Pin 3 has a series resistor on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the LXES1TBCC2-004.

How is the LXES1TBCC2-004 pin 0 connected?

Pin 0 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LXES1TBCC2-004.

What parts are used alongside the LXES1TBCC2-004?

The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.

Which microcontrollers do boards using the LXES1TBCC2-004 use?

Most are built on NXP (5) and FPGA (1).

How big is a typical board using the LXES1TBCC2-004?

The median is 120 × 75 mm.

What is the most popular open source board using the LXES1TBCC2-004?

By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.

Can I simulate one of these boards using the LXES1TBCC2-004 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part