6 open source boards using the MAX3051EKA

Real designs built with the MAX3051EKA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The MAX3051EKA in open source designs

The gallery holds 6 open source boards using the MAX3051EKA from 2 GitHub repositories; a typical one measures about 66 × 31.9 mm and carries around 473 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.

Microcontrollers on boards using the MAX3051EKA

What boards using the MAX3051EKA are built for

MAX3051EKA: common questions

Where can I find a MAX3051EKA reference design?

Each of the 6 boards on this page is a real design using the MAX3051EKA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MAX3051EKA?

The 74LVC1G07GV,125, AT24CS01-ST, HD3SS3220RNHT, LMQ62440BPPQRJRRQ1 and NCP380LSNAJAAT1G appear in the most repositories here.

Which microcontrollers do boards using the MAX3051EKA use?

Most are built on STM32 (5).

How big is a typical board using the MAX3051EKA?

The median is 66 × 31.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the MAX3051EKA?

By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.

Can I simulate one of these boards using the MAX3051EKA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part