8 open source boards using the PCA9517ADP

Real designs built with the PCA9517ADP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The PCA9517ADP in open source designs

The gallery holds 8 open source boards using the PCA9517ADP from 3 GitHub repositories; a typical one measures about 72 × 50.8 mm and carries around 472 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.

Microcontrollers on boards using the PCA9517ADP

PCA9517ADP: common questions

Where can I find a PCA9517ADP reference design?

Each of the 8 boards on this page is a real design using the PCA9517ADP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PCA9517ADP?

The 74LVC1G07GV,125, AT24CS01-ST, HD3SS3220RNHT, LMQ62440BPPQRJRRQ1 and MAX3051EKA appear in the most repositories here.

Which microcontrollers do boards using the PCA9517ADP use?

Most are built on STM32 (5).

How big is a typical board using the PCA9517ADP?

The median is 72 × 50.8 mm, and 25% are two-layer designs.

What is the most popular open source board using the PCA9517ADP?

By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.

Can I simulate one of these boards using the PCA9517ADP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part