6 open source boards using the NCP380LSNAJAAT1G

Real designs built with the NCP380LSNAJAAT1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The NCP380LSNAJAAT1G in open source designs

The gallery holds 6 open source boards using the NCP380LSNAJAAT1G from 2 GitHub repositories; a typical one measures about 66 × 31.9 mm and carries around 473 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.

Microcontrollers on boards using the NCP380LSNAJAAT1G

What boards using the NCP380LSNAJAAT1G are built for

NCP380LSNAJAAT1G: common questions

Where can I find a NCP380LSNAJAAT1G reference design?

Each of the 6 boards on this page is a real design using the NCP380LSNAJAAT1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NCP380LSNAJAAT1G?

The 74LVC1G07GV,125, AT24CS01-ST, HD3SS3220RNHT, LMQ62440BPPQRJRRQ1 and MAX3051EKA appear in the most repositories here.

Which microcontrollers do boards using the NCP380LSNAJAAT1G use?

Most are built on STM32 (5).

How big is a typical board using the NCP380LSNAJAAT1G?

The median is 66 × 31.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the NCP380LSNAJAAT1G?

By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.

Can I simulate one of these boards using the NCP380LSNAJAAT1G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part