8 open source boards using the MCP4922-E/SL

Real designs built with the MCP4922-E/SL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the MCP4922-E/SL

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP4922-E/SL connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF).
  • The SHDN pin is tied to 3.3V on 7 of 7 designs.
  • The VOUTB pin has a series resistor on 4 of 7 designs, most often 100 kΩ (then 270 kΩ).
  • The VOUTA pin has a series resistor on 4 of 7 designs, most often 100 kΩ (then 15 kΩ).
VDDpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 86% · 100 nF (6), 4.7 µF (1)
NCpin 2, 6, 7Connected to: Not connected 100%
SHDNpin 9Connected to: 3.3V 100%
VOUTBpin 10Connected to: Signal 100%
  • Series resistor on 57% · 100 kΩ (2), 270 kΩ (1), 100 Ω (1)
VREFBpin 11Connected to: 3.3V 100%
AVSSpin 12Connected to: GND 100%
VREFApin 13Connected to: 3.3V 100%
VOUTApin 14Connected to: Signal 100%
  • Series resistor on 57% · 100 kΩ (2), 15 kΩ (1), 100 Ω (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenLaserScanningMicroscope by GaudiLabs, OpenThereminV4 by GaudiLabs, OpenTheremin V3 Shield by GaudiLabs and Spikeling by OpenSourceNeuro.

The MCP4922-E/SL in open source designs

The gallery holds 8 open source boards using the MCP4922-E/SL from 8 GitHub repositories; a typical one measures about 101 × 82 mm and carries around 91 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is OpenLaserScanningMicroscope by GaudiLabs.

Parts used alongside the MCP4922-E/SL

Microcontrollers on boards using the MCP4922-E/SL

MCP4922-E/SL: common questions

Where can I find a MCP4922-E/SL reference design?

Each of the 8 boards on this page is a real design using the MCP4922-E/SL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP4922-E/SL VDD pin?

The VDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the MCP4922-E/SL.

How is the MCP4922-E/SL SHDN pin connected?

The SHDN pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MCP4922-E/SL.

What resistor goes on the MCP4922-E/SL VOUTB pin?

The VOUTB pin has a series resistor on 4 of 7 designs, most often 100 kΩ (then 270 kΩ). Counted from the KiCad layouts of 7 open source designs using the MCP4922-E/SL.

What parts are used alongside the MCP4922-E/SL?

The 74HC74, MCP3208T-CI/SL, MCP4921-E/SN and MCP6002T-I/SN appear in the most repositories here.

Which microcontrollers do boards using the MCP4922-E/SL use?

Most are built on AVR/Arduino (3) and ESP32 (3).

How big is a typical board using the MCP4922-E/SL?

The median is 101 × 82 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP4922-E/SL?

By GitHub stars, OpenLaserScanningMicroscope by GaudiLabs, with 342 stars.

Can I simulate one of these boards using the MCP4922-E/SL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part