7 open source boards using the MCP73871-4CCI/ML
Real designs built with the MCP73871-4CCI/ML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-IoT-Development-Board
riteshsalikeripatil
88.7 × 55.6 mm85 parts4LMIT1ESP32
Iot esp32-hw
sourabh-devrukhkar
89.9 × 52.8 mm85 parts4LMIT1ESP32
ESP32 sensor board
D76X
89.9 × 52.8 mm85 parts4LNo license0ESP32
Revision-Project-4 layer-PCB-with
Waqar-98
89.9 × 52.8 mm84 parts4LNo license0ESP32
ESP32 sensor board
rompasaurus
89.9 × 52.8 mm85 parts4LNo license2ESP32
ESP32 4 layers
Chirag-Vadrali
88.7 × 55.6 mm85 parts4LNo license1ESP32
ESP32 sensor board
kanaboid
89.9 × 52.8 mm85 parts4LNo license0
How designs wire the MCP73871-4CCI/ML
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP73871-4CCI/ML connects to, and the resistors, capacitors and other passives placed on it.
- The VPCC pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF.
- The THERM pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ.
- The PG pin has a series resistor on 7 of 7 designs, most often 470 Ω.
- The STAT2 pin has a series resistor on 7 of 7 designs, most often 470 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1, 20 | Connected to: Signal 71% · 5V 29% |
|
| VPCCpin 2 | Connected to: 5V 100% |
|
| SELpin 3 | Connected to: GND 100% | — |
| PROG2pin 4 | Connected to: 5V 100% | — |
| THERMpin 5 | Connected to: Signal 100% |
|
| PGpin 6 | Connected to: Signal 100% |
|
| STAT2pin 7 | Connected to: Signal 100% |
|
| STAT1/LBOpin 8 | Connected to: Signal 100% |
|
| TEpin 9 | Connected to: Signal 100% |
|
| VSSpin 10, 11, 21 | Connected to: GND 100% | — |
| PROG3pin 12 | Connected to: Signal 100% |
|
| PROG1pin 13 | Connected to: Signal 100% |
|
| VBATpin 14, 15 | Connected to: VBAT 100% | — |
| VBAT_SENSEpin 16 | Connected to: VBAT 100% | — |
| CEpin 17 | Connected to: 5V 100% | — |
| INpin 18, 19 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32 sensor board by rompasaurus, ESP32 4 layers by Chirag-Vadrali, ESP32-IoT-Development-Board by riteshsalikeripatil and Iot esp32-hw by sourabh-devrukhkar.
The MCP73871-4CCI/ML in open source designs
The gallery holds 7 open source boards using the MCP73871-4CCI/ML from 7 GitHub repositories; a typical one measures about 89.9 × 52.8 mm and carries around 85 components.
100% use four copper layers or more, and 29% carry an open source license.
The most starred is ESP32 sensor board by rompasaurus.
Parts used alongside the MCP73871-4CCI/ML
Microcontrollers on boards using the MCP73871-4CCI/ML
What boards using the MCP73871-4CCI/ML are built for
MCP73871-4CCI/ML: common questions
Where can I find a MCP73871-4CCI/ML reference design?
Each of the 7 boards on this page is a real design using the MCP73871-4CCI/ML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP73871-4CCI/ML VPCC pin?
The VPCC pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF. Counted from the KiCad layouts of 7 open source designs using the MCP73871-4CCI/ML.
What resistor goes on the MCP73871-4CCI/ML THERM pin?
The THERM pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the MCP73871-4CCI/ML.
What resistor goes on the MCP73871-4CCI/ML PG pin?
The PG pin has a series resistor on 7 of 7 designs, most often 470 Ω. Counted from the KiCad layouts of 7 open source designs using the MCP73871-4CCI/ML.
What parts are used alongside the MCP73871-4CCI/ML?
The BME280, CP2102N-A02-GQFN20, ESP32-C3-WROOM-02-H4, LM1117MPX-3.3/NOPB and MAX4466EXK+T appear in the most repositories here.
Which microcontrollers do boards using the MCP73871-4CCI/ML use?
Most are built on ESP32 (7).
How big is a typical board using the MCP73871-4CCI/ML?
The median is 89.9 × 52.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP73871-4CCI/ML?
By GitHub stars, ESP32 sensor board by rompasaurus, with 2 stars.
Can I simulate one of these boards using the MCP73871-4CCI/ML before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.