4 open source boards using the MITERED_BEND
Real designs built with the MITERED_BEND, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Radar v2
ckflight
90.2 × 40 mm264 parts4LGPL-3.055
STM32Radar v2
TonyStark2007
90.2 × 40 mm264 parts4LGPL-3.015
Radar RF
42.9 × 24.5 mm138 parts4LGPL-3.055
Radar RF
42.9 × 24.5 mm138 parts4LGPL-3.015
The MITERED_BEND in open source designs
The gallery holds 4 open source boards using the MITERED_BEND from 2 GitHub repositories; a typical one measures about 66.6 × 32.2 mm and carries around 201 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Radar v2 by ckflight.
Parts used alongside the MITERED_BEND
Microcontrollers on boards using the MITERED_BEND
What boards using the MITERED_BEND are built for
MITERED_BEND: common questions
Where can I find a MITERED_BEND reference design?
Each of the 4 boards on this page is a real design using the MITERED_BEND. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MITERED_BEND?
The 5400BL15B050E, ADC_Connector, ADF4158, ADL5801 and AP3211 appear in the most repositories here.
Which microcontrollers do boards using the MITERED_BEND use?
Most are built on STM32 (2).
How big is a typical board using the MITERED_BEND?
The median is 66.6 × 32.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the MITERED_BEND?
By GitHub stars, Radar v2 by ckflight, with 55 stars.
Can I simulate one of these boards using the MITERED_BEND before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.