2 open source boards using the NS4158B

Real designs built with the NS4158B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The NS4158B in open source designs

The gallery holds 2 open source boards using the NS4158B from 2 GitHub repositories; a typical one measures about 47.5 × 50 mm and carries around 141 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is M5Pi-F1C100S/200S by imliubo.

What boards using the NS4158B are built for

NS4158B: common questions

Where can I find a NS4158B reference design?

Each of the 2 boards on this page is a real design using the NS4158B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NS4158B?

The CH340E, ESP8089, F1C100s, MPU-6050 and SY8088AAC appear in the most repositories here.

How big is a typical board using the NS4158B?

The median is 47.5 × 50 mm, and 0% are two-layer designs.

What is the most popular open source board using the NS4158B?

By GitHub stars, M5Pi-F1C100S/200S by imliubo, with 197 stars.

Can I simulate one of these boards using the NS4158B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part