7 open source boards using the NUP2202W1T2G
Real designs built with the NUP2202W1T2G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Flipper blackhat
o7-machinehum
91 × 53.1 mm167 parts4LCC-BY-NC-4.0292STM32
LMS8001-Companion
myriadrf
75.9 × 96 mm350 partsNo license36AVR/Arduino
LimeRFE
myriadrf
141.1 × 178.5 mm1325 partsNo license28RP2040/RP2350
RTShield
o7-machinehum
89 × 61 mm87 parts4LCC-BY-NC-4.012Penguino Feather RAK4260
azerimaker
22.9 × 50.8 mm53 partsCERN-OHL-S-2.08PCB Aislador USB
Rubeneliaszabala
64 × 24 mm26 parts2LNo license0Tarea 2 Aislador USB
YunelySR
64 × 24 mm26 parts2LNo license0
How designs wire the NUP2202W1T2G
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the NUP2202W1T2G connects to, and the resistors, capacitors and other passives placed on it.
- The VN pin is tied to GND on 7 of 7 designs.
- The N/C_1 pin is left unconnected on 7 of 7 designs.
- The N/C_2 pin is left unconnected on 7 of 7 designs.
- The I/O_1 pin has a series resistor on 5 of 7 designs, most often 22 Ω (then 27 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I/O_1pin 1 | Connected to: A connector 100% |
|
| VNpin 2 | Connected to: GND 100% | — |
| N/C_1pin 3 | Connected to: Not connected 100% | — |
| N/C_2pin 4 | Connected to: Not connected 100% | — |
| VPpin 5 | Connected to: 5V 86% |
|
| I/O_2pin 6 | Connected to: A connector 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flipper blackhat by o7-machinehum, LMS8001-Companion by myriadrf, LimeRFE by myriadrf and RTShield by o7-machinehum.
The NUP2202W1T2G in open source designs
The gallery holds 7 open source boards using the NUP2202W1T2G from 7 GitHub repositories; a typical one measures about 75.9 × 53.1 mm and carries around 87 components.
50% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Flipper blackhat by o7-machinehum.
Parts used alongside the NUP2202W1T2G
Microcontrollers on boards using the NUP2202W1T2G
What boards using the NUP2202W1T2G are built for
NUP2202W1T2G: common questions
Where can I find a NUP2202W1T2G reference design?
Each of the 7 boards on this page is a real design using the NUP2202W1T2G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NUP2202W1T2G VN pin connected?
The VN pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NUP2202W1T2G.
How is the NUP2202W1T2G N/C_1 pin connected?
The N/C_1 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NUP2202W1T2G.
How is the NUP2202W1T2G N/C_2 pin connected?
The N/C_2 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the NUP2202W1T2G.
What parts are used alongside the NUP2202W1T2G?
The ADUM3160BRWZ, ADUM5000ARWZ and LM66100DCKR appear in the most repositories here.
Which microcontrollers do boards using the NUP2202W1T2G use?
Most are built on AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the NUP2202W1T2G?
The median is 75.9 × 53.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the NUP2202W1T2G?
By GitHub stars, Flipper blackhat by o7-machinehum, with 292 stars.
Can I simulate one of these boards using the NUP2202W1T2G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.