6 open source boards using the PAULA

Real designs built with the PAULA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the PAULA

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PAULA connects to, and the resistors, capacitors and other passives placed on it.

  • The _IPL0 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ.
  • The _IPL1 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ.
  • The _IPL2 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ.
  • The _INT2 pin has a pull-up to 5V on 5 of 6 designs, most often 1 kΩ.
DRD8pin 1Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
DRD6pin 3Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
DRD4pin 5Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
DRD2pin 7Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
GNDpin 8Connected to: GND 83% · a signal 17%
DRD0pin 10Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
_RESETpin 11Connected to: 68000D 33%, 74LS32 33%, FAT_AGNUS_8375 33% · not connected 17%
  • Pull-up to VCC on 67% · 4.7 kΩ (3), 2.7 kΩ (1)
_IPL0pin 13Connected to: 68000D 33%, a connector 33%, 74LS138 33%
  • Pull-up to 5V on 83% · 4.7 kΩ (5)
_IPL1pin 14Connected to: 68000D 33%, a connector 33%, 74LS138 33%
  • Pull-up to 5V on 83% · 4.7 kΩ (5)
_IPL2pin 15Connected to: 68000D 33%, a connector 33%, 74LS138 33%
  • Pull-up to 5V on 83% · 4.7 kΩ (5)
_INT2pin 16Connected to: A connector 100%, VIA_8520 33%, 8520 33%
  • Pull-up to 5V on 83% · 1 kΩ (5)
_INT6pin 18Connected to: A connector 100%, 8520 50%, VIA_8520 33%
  • Pull-up to 5V on 83% · 1 kΩ (5)
VCCpin 27Connected to: AUD 50% · not connected 17% · a signal 33%
  • Decoupling capacitor on 33% · 330 nF (2), 1 mF (2)
CCKpin 28Connected to: 74LS244 33%, 74LS245 33%, 74LS258 33% · not connected 17%
  • Capacitor to GND on 50% · 100 pF (3)
  • Series resistor on 33% · 47 Ω (2)
CCKQpin 29Connected to: 74LS258 33%, GARY_5719 33%, 74F04 33% · not connected 17%
  • Capacitor to GND on 50% · 47 pF (2), 100 pF (1)
  • Series resistor on 33% · 47 Ω (2)
RIGHTpin 30Connected to: LF347 50% · not connected 17%
  • Series resistor on 50% · 360 Ω (3), 10 kΩ (3)
  • Series capacitor on 33% · 100 nF (2)
LEFTpin 31Connected to: LF347 50% · not connected 17%
  • Series resistor on 50% · 360 Ω (3)
  • Series capacitor on 33% · 100 nF (2)
P0Xpin 32Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 50% · 47 nF (3)
  • Series capacitor on 33% · 47 nF (2)
P0Ypin 33Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 50% · 47 nF (3)
  • Series capacitor on 33% · 47 nF (2)
A_GNDpin 34Connected to: GND 50% · not connected 17% · a signal 33%
  • Series capacitor on 33% · 47 nF (4), 100 nF (2), 10 nF (2)
P1Xpin 35Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 50% · 47 nF (3)
  • Series capacitor on 33% · 47 nF (2)
P1Ypin 36Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 50% · 47 nF (3)
  • Series capacitor on 33% · 47 nF (2)
_DKRDpin 37Connected to: A connector 83% · not connected 17%
  • Pull-up to 5V on 83% · 1 kΩ (5)
DRD14pin 43Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
DRD12pin 45Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)
DRD10pin 47Connected to: 74LS373 67%, 74LS244 33%, DENISE 33% · not connected 17%
  • Pull-up to VCC on 33% · 4.7 kΩ (2)

22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raemixx500 by SukkoPera, Amiga 2000 EATX by jasonsbeer, Kicad amiga2000 by rhaamo and Amiga 2000R6 by iansbremner.

The PAULA in open source designs

The gallery holds 6 open source boards using the PAULA from 6 GitHub repositories; a typical one measures about 365.8 × 292.1 mm and carries around 443 components.

83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Raemixx500 by SukkoPera.

What boards using the PAULA are built for

PAULA: common questions

Where can I find a PAULA reference design?

Each of the 6 boards on this page is a real design using the PAULA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the PAULA _IPL0 pin?

The _IPL0 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the PAULA.

What pull-up resistor is used on the PAULA _IPL1 pin?

The _IPL1 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the PAULA.

What pull-up resistor is used on the PAULA _IPL2 pin?

The _IPL2 pin has a pull-up to 5V on 5 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the PAULA.

What parts are used alongside the PAULA?

The LF347, 74LS157, 74LS245, 74LS32 and 74LS373 appear in the most repositories here.

How big is a typical board using the PAULA?

The median is 365.8 × 292.1 mm, and 83% are two-layer designs.

What is the most popular open source board using the PAULA?

By GitHub stars, Raemixx500 by SukkoPera, with 313 stars.

Can I simulate one of these boards using the PAULA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part