13 open source boards using the 74LS38
Real designs built with the 74LS38, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.019927c400-ff amstrad
keirf
99.1 × 99.7 mm34 parts2LCC0-1.0107Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63AmigaPCDriveAdapter
gianlucarenzi
99.1 × 30.5 mm18 parts2LGPL-3.034Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19AmigaDualFloppyInterface
roddersuk
56 × 71.6 mm23 parts2LCERN-OHL-P-2.011STM32
IPCMemoryExpansion
MattisLind
185 × 116 mm112 parts2LMIT3M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT1CPC464-2MINIDDI
Board-Folk
93.4 × 80.2 mm59 parts2LNo license10Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00CPC-DDI20-OLD
Bread80
99.3 × 71 mm45 parts2LCERN-OHL-P-2.05CPC-DDI20
Bread80
99.1 × 65.9 mm38 parts2LCERN-OHL-P-2.05
How designs wire the 74LS38
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74LS38 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 100 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 5 | Connected to: Signal 100% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga 2000 EATX by jasonsbeer, 27c400-ff amstrad by keirf, Multicomp6809 by nealcrook and AmigaPCDriveAdapter by gianlucarenzi.
The 74LS38 in open source designs
The gallery holds 13 open source boards using the 74LS38 from 12 GitHub repositories; a typical one measures about 170 × 99.7 mm and carries around 59 components.
92% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.
The most starred is Amiga 2000 EATX by jasonsbeer.
Parts used alongside the 74LS38
Microcontrollers on boards using the 74LS38
What boards using the 74LS38 are built for
74LS38: common questions
Where can I find a 74LS38 reference design?
Each of the 13 boards on this page is a real design using the 74LS38. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS38 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 12 open source designs using the 74LS38.
What parts are used alongside the 74LS38?
The 74LS08, 74LS32, 74LS74, 74HCT244 and 74LS06 appear in the most repositories here.
Which microcontrollers do boards using the 74LS38 use?
Most are built on STM32 (1).
How big is a typical board using the 74LS38?
The median is 170 × 99.7 mm, and 92% are two-layer designs.
What is the most popular open source board using the 74LS38?
By GitHub stars, Amiga 2000 EATX by jasonsbeer, with 199 stars.
Can I simulate one of these boards using the 74LS38 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.