20 open source boards using the LF347
Real designs built with the LF347, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raemixx500
SukkoPera
365.8 × 254 mm349 parts2LNo license313SCOPETREX
schlae
177.8 × 127 mm197 parts2LNo license245Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19- schematic only · 419 parts
Retro-Schematics
omega9380
419 partsMIT19 The Wozblaster Reloaded
cristianoag
100 × 64.8 mm46 parts2LNo license10LogicBoard 3GE
tullulah
104.4 × 141.1 mm163 parts4LGPL-3.03A500Sub
Bambelweeny57
365.8 × 254 mm344 parts2LNo license0SCOPETREX
magikghost
177.8 × 127 mm197 parts2LNo license0MapEletro
Heymity
250 × 200 mm52 parts2LNo license0NUBUSPAS16-DB
demik
53.3 × 76.2 mm54 parts2LCERN-OHL-P-2.027LogicBoard 3GE Repro
tullulah
99.2 × 101 mm159 parts4LGPL-3.0368k nano single board computer
demik
127 × 90.8 mm49 parts2LCERN-OHL-P-2.027PIC
ADBDB
demik
100 × 50 mm34 parts2LCERN-OHL-P-2.027VIA Plus
demik
77.5 × 44.7 mm18 parts4LCERN-OHL-P-2.027AVR/Arduino
68k nano watchdog
demik
90.2 × 26 mm13 parts2LCERN-OHL-P-2.027PAL16R LART
demik
40.6 × 47 mm6 parts2LCERN-OHL-P-2.027VIA PLCC2DIP
demik
77.5 × 25.4 mm5 parts2LCERN-OHL-P-2.027- schematic only · 33 parts
PICDB
demik
33 parts2LCERN-OHL-P-2.027
How designs wire the LF347
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LF347 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series capacitor on 9 of 11 designs, most often 6.8 nF (then 22 µF).
- The - pins have a series resistor on 9 of 11 designs, most often 10 kΩ (then 360 Ω).
- The A0 pin has a series resistor on 9 of 11 designs, most often 10 kΩ (then 360 Ω).
- The E pin has a series capacitor on 8 of 11 designs, most often 6.8 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 1 | Connected to: 4066 25% |
|
| -pin 2, 6, 9, 13 | Connected to: Signal 91% |
|
| +pin 3, 5, 10, 12 | Connected to: CD4052B 27% |
|
| V+pin 4 | Connected to: 5V 91% | — |
| O3pin 7 | Connected to: 4066 27% |
|
| GNDpin 8 | Connected to: A connector 27% |
|
| V-pin 11 | Connected to: Signal 55% · -5V 36% |
|
| A0pin 14 | Connected to: 4066 27%, a connector 27% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raemixx500 by SukkoPera, SCOPETREX by schlae, Amiga 2000 EATX by jasonsbeer and Kicad amiga2000 by rhaamo.
The LF347 in open source designs
The gallery holds 20 open source boards using the LF347 from 12 GitHub repositories; a typical one measures about 115.7 × 114 mm and carries around 107 components.
79% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.
The most starred is Raemixx500 by SukkoPera.
Parts used alongside the LF347
Microcontrollers on boards using the LF347
What boards using the LF347 are built for
LF347: common questions
Where can I find a LF347 reference design?
Each of the 20 boards on this page is a real design using the LF347. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LF347 - pin connected?
The - pins have a series capacitor on 9 of 11 designs, most often 6.8 nF (then 22 µF). Counted from the KiCad layouts of 11 open source designs using the LF347.
What resistor goes on the LF347 A0 pin?
The A0 pin has a series resistor on 9 of 11 designs, most often 10 kΩ (then 360 Ω). Counted from the KiCad layouts of 11 open source designs using the LF347.
How is the LF347 E pin connected?
The E pin has a series capacitor on 8 of 11 designs, most often 6.8 nF (then 22 µF). Counted from the KiCad layouts of 11 open source designs using the LF347.
What parts are used alongside the LF347?
The 74LS32, 74LS157, 74LS244, PAULA and 74LS245 appear in the most repositories here.
Which microcontrollers do boards using the LF347 use?
Most are built on AVR/Arduino (1) and PIC (1).
How big is a typical board using the LF347?
The median is 115.7 × 114 mm, and 79% are two-layer designs.
What is the most popular open source board using the LF347?
By GitHub stars, Raemixx500 by SukkoPera, with 313 stars.
Can I simulate one of these boards using the LF347 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.