9 open source boards using the RFM-0505S

Real designs built with the RFM-0505S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the RFM-0505S

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the RFM-0505S connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN- pin is tied to GND on 8 of 8 designs.
  • The VOUT- pin is tied to GND on 6 of 8 designs.
  • The VOUT+ pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 4.7 µF).
VIN-pin 1Connected to: GND 100%
VIN+pin 2Connected to: 5V 100%
  • Decoupling capacitor on 38% · 6.8 µF (2), 10 µF (1), 100 nF (1)
VOUT-pin 3Connected to: GND 75%
VOUT+pin 4Connected to: 5V 50% · a signal 38%
  • Decoupling capacitor on 50% · 100 nF (5), 4.7 µF (2), 47 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pico dram tester by schlae, Controller by westonb, WIBL by CCOMJHC and Ph by Ranthalion.

The RFM-0505S in open source designs

The gallery holds 9 open source boards using the RFM-0505S from 9 GitHub repositories; a typical one measures about 74.2 × 63 mm and carries around 58 components.

63% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Pico dram tester by schlae.

Parts used alongside the RFM-0505S

Microcontrollers on boards using the RFM-0505S

RFM-0505S: common questions

Where can I find a RFM-0505S reference design?

Each of the 9 boards on this page is a real design using the RFM-0505S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RFM-0505S VIN- pin connected?

The VIN- pin is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the RFM-0505S.

How is the RFM-0505S VOUT- pin connected?

The VOUT- pin is tied to GND on 6 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the RFM-0505S.

What decoupling capacitors do designs use on the RFM-0505S VOUT+ pin?

The VOUT+ pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the RFM-0505S.

Which microcontrollers do boards using the RFM-0505S use?

Most are built on ESP32 (2), STM32 (2), AVR/Arduino (1) and FPGA (1).

How big is a typical board using the RFM-0505S?

The median is 74.2 × 63 mm, and 63% are two-layer designs.

What is the most popular open source board using the RFM-0505S?

By GitHub stars, Pico dram tester by schlae, with 161 stars.

Can I simulate one of these boards using the RFM-0505S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part