4 open source boards using the SG-210STF
Real designs built with the SG-210STF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Radar v2
ckflight
90.2 × 40 mm264 parts4LGPL-3.055
STM32Radar v2
TonyStark2007
90.2 × 40 mm264 parts4LGPL-3.015
Radar RF
42.9 × 24.5 mm138 parts4LGPL-3.055
Radar RF
42.9 × 24.5 mm138 parts4LGPL-3.015
The SG-210STF in open source designs
The gallery holds 4 open source boards using the SG-210STF from 2 GitHub repositories; a typical one measures about 66.6 × 32.2 mm and carries around 201 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Radar v2 by ckflight.
Parts used alongside the SG-210STF
Microcontrollers on boards using the SG-210STF
What boards using the SG-210STF are built for
SG-210STF: common questions
Where can I find a SG-210STF reference design?
Each of the 4 boards on this page is a real design using the SG-210STF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SG-210STF?
The 5400BL15B050E, ADC_Connector, ADF4158, ADL5801 and AP3211 appear in the most repositories here.
Which microcontrollers do boards using the SG-210STF use?
Most are built on STM32 (2).
How big is a typical board using the SG-210STF?
The median is 66.6 × 32.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the SG-210STF?
By GitHub stars, Radar v2 by ckflight, with 55 stars.
Can I simulate one of these boards using the SG-210STF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.