12 open source boards using the SIM7080G

Real designs built with the SIM7080G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the SIM7080G

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SIM7080G connects to, and the resistors, capacitors and other passives placed on it.

  • The PCM_DOUT pin is left unconnected on 11 of 11 designs.
  • The UART1_DCD pin is left unconnected on 10 of 10 designs.
  • The PCM_CLK pin is left unconnected on 10 of 11 designs.
  • The UART2_TXD pin is left unconnected on 10 of 10 designs.
UART1_RTSpin 3Connected to: Not connected 73%
UART1_CTSpin 4Connected to: Not connected 90%
UART1_DCDpin 5Connected to: Not connected 100%
GNDpin 8, 13, 19, 21, 27, 30, 31, 33, 36, 37, 45, 63, 66, 67, 69, 70, 71, 72, 73, 74, 75, 76, 77Connected to: GND 92%
PCM_DINpin 9Connected to: Not connected 82% · a signal 18%
PCM_DOUTpin 10Connected to: Not connected 100%
PCM_CLKpin 11Connected to: Not connected 91%
PCM_SYNCpin 12Connected to: Not connected 82%
GPIO5pin 14Connected to: Not connected 90%
SIM_DATApin 15Connected to: Signal 90%
  • Series resistor on 70% · 22 Ω (6), 10 kΩ (1)
  • Capacitor to GND on 30% · 33 pF (2), 22 pF (1)
SIM_CLKpin 16Connected to: Signal 90%
  • Series resistor on 60% · 22 Ω (6)
  • Capacitor to GND on 30% · 33 pF (2), 22 pF (1)
SIM_RSTpin 17Connected to: Signal 90%
  • Series resistor on 60% · 22 Ω (6)
  • Capacitor to GND on 30% · 33 pF (2), 22 pF (1)
SIM_VDDpin 18Connected to: A connector 50%
  • Capacitor to GND on 80% · 100 nF (8)
UART2_TXDpin 22Connected to: Not connected 100%
UART2_RXDpin 23Connected to: Not connected 100%
USB_VBUSpin 24Connected to: Not connected 60% · VBUS 20% · a signal 20%
USB_DPpin 25Connected to: Not connected 60% · a signal 40%
USB_DMpin 26Connected to: Not connected 60% · a signal 40%
NC_28pin 28Connected to: Not connected 100%
NC_29pin 29Connected to: Not connected 100%
RF_ANTpin 32Connected to: A connector 50%
  • Capacitor to GND on 40%
VBATpin 34, 35Connected to: 3.3V 80%
  • Decoupling capacitor on 70% · 100 nF (12), 100 µF (10), 1 µF (6)
ADCpin 38Connected to: Not connected 100%
NETLIGHTpin 41Connected to: Signal 60% · not connected 40%
  • Series resistor on 50% · 4.7 kΩ (3), 330 Ω (1), 220 Ω (1)
STATUSpin 42Connected to: Signal 80% · not connected 20%
  • Series resistor on 50% · 4.7 kΩ (2), 330 Ω (1), 220 Ω (1)
ANT_CONTROL1pin 43Connected to: Not connected 100%
ANT_CONTROL0pin 44Connected to: Not connected 100%
NC_46pin 46Connected to: Not connected 100%
NC_47pin 47Connected to: Not connected 100%
SPI_CSpin 48Connected to: Not connected 100%
SPI_MOSIpin 49Connected to: Not connected 100%
SPI_CLKpin 50Connected to: Not connected 91%
SPI_MISOpin 51Connected to: Not connected 100%
NC_52pin 52Connected to: Not connected 100%
NC_53pin 53Connected to: Not connected 100%
NC_54pin 54Connected to: Not connected 100%
NC_55pin 55Connected to: Not connected 100%
NC_56pin 56Connected to: Not connected 100%
GPIO1pin 57Connected to: Not connected 100%
GPIO2pin 58Connected to: Not connected 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mdb slave esp32s3-sim7080g by nodestark, Sim7080 dev board by techstudio-design, Sim7080g by absmach and ESP32-S3 Cellular GNSS Tracker by meerzafarnoohani.

The SIM7080G in open source designs

The gallery holds 12 open source boards using the SIM7080G from 11 GitHub repositories; a typical one measures about 56 × 75 mm and carries around 77 components.

67% use four copper layers or more, and 58% carry an open source license.

The most starred is Mdb slave esp32s3-sim7080g by nodestark.

Microcontrollers on boards using the SIM7080G

SIM7080G: common questions

Where can I find a SIM7080G reference design?

Each of the 12 boards on this page is a real design using the SIM7080G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SIM7080G PCM_DOUT pin connected?

The PCM_DOUT pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SIM7080G.

How is the SIM7080G UART1_DCD pin connected?

The UART1_DCD pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 11 open source designs using the SIM7080G.

How is the SIM7080G PCM_CLK pin connected?

The PCM_CLK pin is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SIM7080G.

What parts are used alongside the SIM7080G?

The AP2112K-3.3TRG1, ESP32-S3-WROOM-1U-N16R8, MCP73831-2-OT and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the SIM7080G use?

Most are built on ESP32 (6), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the SIM7080G?

The median is 56 × 75 mm, and 33% are two-layer designs.

What is the most popular open source board using the SIM7080G?

By GitHub stars, Mdb slave esp32s3-sim7080g by nodestark, with 173 stars.

Can I simulate one of these boards using the SIM7080G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part