9 open source boards using the SN74AHCT125

Real designs built with the SN74AHCT125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the SN74AHCT125

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SN74AHCT125 connects to, and the resistors, capacitors and other passives placed on it.

  • The 1OE pin is tied to GND on 8 of 8 designs.
  • The 2OE pin is tied to GND on 7 of 8 designs.
  • The 1Y pin has a series resistor on 5 of 8 designs, most often 470 Ω (then 330 Ω).
  • The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 470 µF).
1OEpin 1Connected to: GND 100%
1Ypin 3Connected to: A connector 25%
  • Series resistor on 63% · 470 Ω (2), 330 Ω (1), 33 Ω (1)
2OEpin 4Connected to: GND 88%
2Ypin 6Connected to: A connector 25% · not connected 38%
  • Series resistor on 38% · 470 Ω (2)
GNDpin 7Connected to: GND 88%
3Ypin 8Connected to: Not connected 63% · a signal 38%
3OEpin 10Connected to: GND 63% · a signal 25%
4Ypin 11Connected to: Not connected 63% · a signal 38%
4OEpin 13Connected to: GND 63% · a signal 25%
VCCpin 14Connected to: 5V 88%
  • Decoupling capacitor on 63% · 100 nF (5), 470 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcb ws2812-wifi controller by klein0r, Pcb ws2812-ethernet controller by klein0r, My babys got led by mcqn and Beat707 by FrankBuss.

The SN74AHCT125 in open source designs

The gallery holds 9 open source boards using the SN74AHCT125 from 8 GitHub repositories; a typical one measures about 100 × 73.9 mm and carries around 65 components.

67% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Pcb ws2812-wifi controller by klein0r.

Parts used alongside the SN74AHCT125

Microcontrollers on boards using the SN74AHCT125

What boards using the SN74AHCT125 are built for

SN74AHCT125: common questions

Where can I find a SN74AHCT125 reference design?

Each of the 9 boards on this page is a real design using the SN74AHCT125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN74AHCT125 1OE pin connected?

The 1OE pin is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SN74AHCT125.

How is the SN74AHCT125 2OE pin connected?

The 2OE pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SN74AHCT125.

What resistor goes on the SN74AHCT125 1Y pin?

The 1Y pin has a series resistor on 5 of 8 designs, most often 470 Ω (then 330 Ω). Counted from the KiCad layouts of 8 open source designs using the SN74AHCT125.

What parts are used alongside the SN74AHCT125?

The AMS1117-3.3, MT3608, RP2354A, TP4056 and W5500 appear in the most repositories here.

Which microcontrollers do boards using the SN74AHCT125 use?

Most are built on AVR/Arduino (2), ESP32 (2) and ESP8266 (1).

How big is a typical board using the SN74AHCT125?

The median is 100 × 73.9 mm, and 67% are two-layer designs.

What is the most popular open source board using the SN74AHCT125?

By GitHub stars, Pcb ws2812-wifi controller by klein0r, with 80 stars.

Can I simulate one of these boards using the SN74AHCT125 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part