29 open source boards using the W65C02SxP
Real designs built with the W65C02SxP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license786502Rev2
stuenkels
102 × 102 mm60 parts4LNo license11N8 Bit Special
nrivard
100 × 100 mm45 parts4LMIT10Vectron handheld
nickbild
273.1 × 221 mm42 parts2LNo license10Vectron vga plus text mode
nickbild
165.7 × 93.3 mm31 parts2LNo license9Rosco 6502
rosco-6502
100 × 100 mm55 parts4LMIT8Vectron 65 plus
nickbild
131.1 × 79.4 mm48 parts2LNo license5Ifle3-symrna
barkolorious
184.9 × 112 mm27 parts2LNo license3A1
smaldragon
190 × 100 mm121 parts2LUnlicense2FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02AVR/Arduino
Sbc6502a1
tkhshmsy
95 × 100 mm36 parts2LMIT26502
justjoheinz
128.9 × 81.3 mm24 parts2LNo license2Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0AVR/Arduino
6502atty
bendooks
112.5 × 124.5 mm98 parts2LCERN-OHL-S-2.006502-min sbc
gcoonrod
100 × 100 mm48 parts4LApache-2.006502-sbc
davidday99
96.5 × 96.6 mm47 parts4LNo license0Raspberry Pi
Clementina hardware
fran150
172.7 × 108.6 mm42 parts2LGPL-3.006502-SBC-V1.3
UraniumNutt
152.4 × 76.2 mm41 parts2LNo license06502-Retro!
linuxplayground
100 × 100 mm35 parts4LNo license0A0
smaldragon
190 × 100 mm118 parts2LUnlicense2Cpu board 03 4l
sim82
99.1 × 94.2 mm62 parts4LMIT1A2
smaldragon
190 × 100 mm116 parts2LUnlicense2Main board
nojan1
230 × 100 mm74 parts4LNo license0Cpu board 02
sim82
119.4 × 91.4 mm58 parts2LMIT1Pcb01 4l
sim82
119.4 × 91.4 mm58 parts4LMIT1Cpu
atarola
102.5 × 30 mm10 parts2LNo license0Retro stack cpu
gcoonrod
99.1 × 99.1 mm18 parts2LApache-2.006502 6800 CPU
roberto314
100 × 100 mm39 parts2LBSD-2-Clause0
How designs wire the W65C02SxP
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the W65C02SxP connects to, and the resistors, capacitors and other passives placed on it.
- The RDY pin has a pull-up to VCC on 15 of 22 designs, most often 3.3 kΩ (then 2.2 kΩ).
- The RES pin has a pull-up to VCC on 15 of 22 designs, most often 1 kΩ (then 3.3 kΩ).
- The NMI pin has a pull-up to VCC on 14 of 22 designs, most often 3.3 kΩ (then 2.2 kΩ).
- The VP pin is left unconnected on 16 of 22 designs (GND on 3, a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VPpin 1 | Connected to: Not connected 73% | — |
| RDYpin 2 | Connected to: A connector 32% |
|
| Φ1pin 3 | Connected to: Not connected 68% · a signal 32% | — |
| IRQpin 4 | Connected to: A connector 64% |
|
| MLpin 5 | Connected to: Not connected 73% · a signal 27% | — |
| NMIpin 6 | Connected to: A connector 50% |
|
| SYNCpin 7 | Connected to: Not connected 73% · a signal 27% | — |
| VDDpin 8 | Connected to: VCC 86% |
|
| VSSpin 21 | Connected to: GND 86% | — |
| NCpin 35 | Connected to: Not connected 82% · a signal 18% | — |
| BEpin 36 | Connected to: A connector 23% · 5V 27% |
|
| Φ0pin 37 | Connected to: 74HC00 28%, a connector 28% |
|
| Φ2pin 39 | Connected to: Not connected 64% · a signal 36% | — |
| RESpin 40 | Connected to: A connector 44% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vic2020mainboard by danwerner21, 6502Rev2 by stuenkels, Vectron handheld by nickbild and N8 Bit Special by nrivard.
The W65C02SxP in open source designs
The gallery holds 29 open source boards using the W65C02SxP from 22 GitHub repositories; a typical one measures about 119.4 × 100 mm and carries around 48 components.
66% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is Vic2020mainboard by danwerner21.
Parts used alongside the W65C02SxP
Microcontrollers on boards using the W65C02SxP
What boards using the W65C02SxP are built for
W65C02SxP: common questions
Where can I find a W65C02SxP reference design?
Each of the 29 boards on this page is a real design using the W65C02SxP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the W65C02SxP RDY pin?
The RDY pin has a pull-up to VCC on 15 of 22 designs, most often 3.3 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 22 open source designs using the W65C02SxP.
What pull-up resistor is used on the W65C02SxP RES pin?
The RES pin has a pull-up to VCC on 15 of 22 designs, most often 1 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 22 open source designs using the W65C02SxP.
What pull-up resistor is used on the W65C02SxP NMI pin?
The NMI pin has a pull-up to VCC on 14 of 22 designs, most often 3.3 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 22 open source designs using the W65C02SxP.
What parts are used alongside the W65C02SxP?
The 74HC00, W65C22SxP, 28C256, 74LS138 and HM62256BLP appear in the most repositories here.
Which microcontrollers do boards using the W65C02SxP use?
Most are built on AVR/Arduino (2), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the W65C02SxP?
The median is 119.4 × 100 mm, and 66% are two-layer designs.
What is the most popular open source board using the W65C02SxP?
By GitHub stars, Vic2020mainboard by danwerner21, with 78 stars.
Can I simulate one of these boards using the W65C02SxP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.