17 open source boards using the SN74HC74DR
Real designs built with the SN74HC74DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
MSAP-2 rev.A
mehrantsi
240 × 1056 mm658 parts2LMIT13ANUFS-BSPD-2026
chithigun23
75.5 × 62 mm115 parts4LNo license1BMS-Master-STM32-Nucleo-G474RE
gabrielfbdiniz
70 × 115 mm66 parts4LNo license1Cm5-guard-A
anatolbricoham
290 × 280 mm157 parts2LNo license0Cm5-guard-A
Brico-Hams
290 × 280 mm157 parts2LNo license0- schematic only · 88 partsSTM32
ReefVolt PlugControl — 2ch AC heater carrier
blueacro
88 parts4LCERN-OHL-P-2.00 AVR/Arduino
MSAP-2 rev.A SMD
mehrantsi
178 × 711 mm658 parts2LMIT13Placed prerouted
Brico-Hams
290 × 280 mm157 parts2LNo license0Placed prerouted
anatolbricoham
290 × 280 mm157 parts2LNo license0AVR/Arduino
MSAP-2-production
mehrantsi
300 × 248.8 mm520 parts6LMIT13AVR/Arduino
MSAP-2-production routed
mehrantsi
300 × 248.8 mm520 parts6LMIT13AVR/Arduino
Pre connector model normalization v1
mehrantsi
300 × 248.8 mm520 parts6LMIT13Raspberry Pi
Dut power rev a
jackalkahwati
160 × 100 mm145 parts4LNo license0AVR/Arduino
Pre cpl coordinate fix v1
mehrantsi
300 × 248.8 mm520 parts6LMIT13AVR/Arduino
Pre current source usb keepout repair v1
mehrantsi
300 × 248.8 mm520 parts6LMIT13AVR/Arduino
Pre j5-model alignment route v1
mehrantsi
300 × 248.8 mm520 parts6LMIT13AVR/Arduino
MSAP-2-production source
mehrantsi
300 × 248.8 mm375 parts6LMIT13
How designs wire the SN74HC74DR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74HC74DR connects to, and the resistors, capacitors and other passives placed on it.
- The Q_8 pin is left unconnected on 6 of 6 designs.
- The VCC_14 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- The Q_9 pin is left unconnected on 5 of 6 designs.
- The C_11 pin is tied to GND on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLR_1pin 1 | Connected to: SN74HC08DR 33% |
|
| C_3pin 3 | Connected to: SN74HC14DR 33% · GND 33% |
|
| PRE_4pin 4 | Connected to: AP2112K-3.3TRG1 33%, MCP23017-E/SO 33%, SN74HC08DR 33% · VCC 17% |
|
| Q_5pin 5 | Connected to: SN74HC08DR 50% |
|
| GND_7pin 7 | Connected to: GND 83% · a signal 17% | — |
| Q_8pin 8 | Connected to: Not connected 100% | — |
| Q_9pin 9 | Connected to: Not connected 83% · a signal 17% | — |
| C_11pin 11 | Connected to: GND 67% · a signal 33% | — |
| D_12pin 12 | Connected to: GND 67% · VCC 17% · a signal 17% | — |
| CLR_13pin 13 | Connected to: GND 33% · 5V 33% · a signal 33% |
|
| VCC_14pin 14 | Connected to: VCC 50% · a signal 50% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MSAP-2-production by mehrantsi, ANUFS-BSPD-2026 by chithigun23, BMS-Master-STM32-Nucleo-G474RE by gabrielfbdiniz and Cm5-guard-A by anatolbricoham.
The SN74HC74DR in open source designs
The gallery holds 17 open source boards using the SN74HC74DR from 7 GitHub repositories; a typical one measures about 290 × 248.8 mm and carries around 375 components.
65% use four copper layers or more, and 59% carry an open source license.
The most starred is MSAP-2 rev.A SMD by mehrantsi.
Parts used alongside the SN74HC74DR
Microcontrollers on boards using the SN74HC74DR
What boards using the SN74HC74DR are built for
SN74HC74DR: common questions
Where can I find a SN74HC74DR reference design?
Each of the 17 boards on this page is a real design using the SN74HC74DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74HC74DR Q_8 pin connected?
The Q_8 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74HC74DR.
What decoupling capacitors do designs use on the SN74HC74DR VCC_14 pin?
The VCC_14 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SN74HC74DR.
How is the SN74HC74DR Q_9 pin connected?
The Q_9 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SN74HC74DR.
What parts are used alongside the SN74HC74DR?
The SN74HC08DR, AP2112K-3.3TRG1, LTV-817S, MCP23017-E/SO and SN74HC123DR appear in the most repositories here.
Which microcontrollers do boards using the SN74HC74DR use?
Most are built on AVR/Arduino (9), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the SN74HC74DR?
The median is 290 × 248.8 mm, and 35% are two-layer designs.
What is the most popular open source board using the SN74HC74DR?
By GitHub stars, MSAP-2 rev.A SMD by mehrantsi, with 13 stars.
Can I simulate one of these boards using the SN74HC74DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.