12 open source boards using the SN74LVC245APW
Real designs built with the SN74LVC245APW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532ESP32 LogicAnalyzer
lmcapacho
48 × 53.3 mm12 parts2LGPL-3.026STM32
Longboi
KungfuPancake
358 × 40 mm285 parts4LApache-2.07ESP32
Petdisk esp32
yo5ptd
75 × 49.8 mm31 parts2LGPL-3.06RP2040/RP2350
RP2040-Logic-Analyzer
BlackPancakes
55.2 × 24.4 mm50 parts4LCERN-OHL-P-2.03RP2040/RP2350
Z80neo
TurBoss
108.4 × 96.8 mm34 parts2LGPL-3.02STM32
GrblHAL CNC
jaytektas
150 × 105 mm269 parts4LNo license0Raspberry Pi
Motherboard
mikegoelzer
152.4 × 76.2 mm151 parts4LCustom license0RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0AVR/Arduino
KM11 mainboard
fjalvingh
131.8 × 80 mm41 parts2LNo license0ESP32
2xpetdisk esp32
yo5ptd
75 × 100 mm31 parts2LGPL-3.06Control Board
stormbots
120.7 × 77.5 mm52 parts2LNo license3
How designs wire the SN74LVC245APW
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74LVC245APW connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 11 designs, most often 100 nF (then 4.7 µF).
- The DIR pin is tied to 3.3V on 7 of 11 designs (a signal on 4).
- The OE pin is tied to GND on 7 of 11 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DIRpin 1 | Connected to: 3.3V 64% · a signal 36% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| OEpin 19 | Connected to: GND 64% · a signal 27% | — |
| VCCpin 20 | Connected to: 3.3V 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL86jr by MicroCoreLabs, ESP32 LogicAnalyzer by lmcapacho, Longboi by KungfuPancake and Petdisk esp32 by yo5ptd.
The SN74LVC245APW in open source designs
The gallery holds 12 open source boards using the SN74LVC245APW from 11 GitHub repositories; a typical one measures about 114.5 × 76.8 mm and carries around 51 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is MCL86jr by MicroCoreLabs.
Parts used alongside the SN74LVC245APW
Microcontrollers on boards using the SN74LVC245APW
What boards using the SN74LVC245APW are built for
SN74LVC245APW: common questions
Where can I find a SN74LVC245APW reference design?
Each of the 12 boards on this page is a real design using the SN74LVC245APW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC245APW VCC pin?
The VCC pin has a decoupling capacitor on 8 of 11 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LVC245APW.
How is the SN74LVC245APW DIR pin connected?
The DIR pin is tied to 3.3V on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the SN74LVC245APW.
How is the SN74LVC245APW OE pin connected?
The OE pin is tied to GND on 7 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the SN74LVC245APW.
What parts are used alongside the SN74LVC245APW?
The W25Q128JVS, AMS1117-3.3 and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC245APW use?
Most are built on RP2040/RP2350 (3), ESP32 (2), STM32 (2) and AVR/Arduino (1).
How big is a typical board using the SN74LVC245APW?
The median is 114.5 × 76.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC245APW?
By GitHub stars, MCL86jr by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the SN74LVC245APW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.