9 open source boards using the SY8113BADC
Real designs built with the SY8113BADC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350MiSTle - GW3A LV20 LQ144 Development Board
MiSTle-Dev
110 × 67 mm167 parts2LNo license17
ESP32NoU3
AlfredoSystems
46 × 56 mm113 parts4LNo license1
MtN1 Draft 1
Momentum-Devices
40 × 46 mm64 parts4LCERN-OHL-W-2.01
RP2040/RP2350Misterydev20k
90 × 67 mm162 parts2LNo license17
ESP32NoU3-Panelized
138 × 168 mm113 parts4LNo license1
MtN1 Draft 2
40 × 46 mm50 parts4LCERN-OHL-W-2.01
Keyboard
222.3 × 63 mm144 parts2LNo license17
ESP32NoU3-Lite
46 × 46 mm87 parts4LNo license1
RP2040/RP2350T20 pmod
53.6 × 71.4 mm15 parts2LNo license17
The SY8113BADC in open source designs
The gallery holds 9 open source boards using the SY8113BADC from 3 GitHub repositories; a typical one measures about 53.6 × 63 mm and carries around 113 components.
56% use four copper layers or more, and 22% carry an open source license.
The most starred is MiSTle - GW3A LV20 LQ144 Development Board by MiSTle-Dev.
Parts used alongside the SY8113BADC
Microcontrollers on boards using the SY8113BADC
What boards using the SY8113BADC are built for
SY8113BADC: common questions
Where can I find a SY8113BADC reference design?
Each of the 9 boards on this page is a real design using the SY8113BADC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SY8113BADC use?
Most are built on ESP32 (3) and RP2040/RP2350 (3).
How big is a typical board using the SY8113BADC?
The median is 53.6 × 63 mm, and 44% are two-layer designs.
What is the most popular open source board using the SY8113BADC?
By GitHub stars, MiSTle - GW3A LV20 LQ144 Development Board by MiSTle-Dev, with 17 stars.
Can I simulate one of these boards using the SY8113BADC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.