9 open source boards using the TAR5SxxU_SOT353F
Real designs built with the TAR5SxxU_SOT353F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Caravel-Nucleo v2-M.2
efabless
73.4 × 92.5 mm90 parts2LNo license40Caravel-Nucleo v2-M.2
chipfoundry
73.4 × 92.5 mm90 parts2LNo license1Caravel-Nucleo v2-M.2
weyer7
73.4 × 92.5 mm90 parts2LNo license1Fab-Drawing caravel dev v5-M.2
sdmay24-21
76.2 × 73.8 mm62 parts2LApache-2.01Caravel-Nucleo v2-M.2
Rimal12345
73.4 × 92.5 mm90 parts2LNo license0Caravel Nucleo
efabless
68.1 × 92.5 mm89 parts2LNo license40Caravel Nucleo
chipfoundry
68.1 × 92.5 mm89 parts2LNo license1Caravel Nucleo
weyer7
68.1 × 92.5 mm89 parts2LNo license1Caravel Nucleo
Rimal12345
68.1 × 92.5 mm89 parts2LNo license0
How designs wire the TAR5SxxU_SOT353F
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TAR5SxxU_SOT353F connects to, and the resistors, capacitors and other passives placed on it.
- The CONTROL pin has a pull-up to 5V on 5 of 5 designs, most often 10 kΩ.
- The NOISE pin has a capacitor to GND on 5 of 5 designs, most often 10 nF.
- The VOUT pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CONTROLpin 1 | Connected to: AZ1117CH-1.8TRG1 80% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NOISEpin 3 | Connected to: Signal 100% |
|
| VOUTpin 4 | Connected to: A connector 80% · VDDA 20% |
|
| VINpin 5 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel Nucleo by efabless, Caravel Nucleo by chipfoundry, Fab-Drawing caravel dev v5-M.2 by sdmay24-21 and Caravel Nucleo by weyer7.
The TAR5SxxU_SOT353F in open source designs
The gallery holds 9 open source boards using the TAR5SxxU_SOT353F from 5 GitHub repositories; a typical one measures about 73.4 × 92.5 mm and carries around 89 components.
100% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Caravel-Nucleo v2-M.2 by efabless.
Parts used alongside the TAR5SxxU_SOT353F
What boards using the TAR5SxxU_SOT353F are built for
TAR5SxxU_SOT353F: common questions
Where can I find a TAR5SxxU_SOT353F reference design?
Each of the 9 boards on this page is a real design using the TAR5SxxU_SOT353F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TAR5SxxU_SOT353F CONTROL pin?
The CONTROL pin has a pull-up to 5V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TAR5SxxU_SOT353F.
How is the TAR5SxxU_SOT353F NOISE pin connected?
The NOISE pin has a capacitor to GND on 5 of 5 designs, most often 10 nF. Counted from the KiCad layouts of 5 open source designs using the TAR5SxxU_SOT353F.
How is the TAR5SxxU_SOT353F VOUT pin connected?
The VOUT pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the TAR5SxxU_SOT353F.
What parts are used alongside the TAR5SxxU_SOT353F?
The caravel-M.2-card, FT232H, W25Q32FVSS, AZ1117CH-1.8TRG1 and caravel_breakout appear in the most repositories here.
How big is a typical board using the TAR5SxxU_SOT353F?
The median is 73.4 × 92.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the TAR5SxxU_SOT353F?
By GitHub stars, Caravel-Nucleo v2-M.2 by efabless, with 40 stars.
Can I simulate one of these boards using the TAR5SxxU_SOT353F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.