11 open source boards using the TC2117
Real designs built with the TC2117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
E bike conversion kit
ansh1113
186.9 × 129.8 mm175 parts4LNo license1STM32
Electrical
usernamegemaoa
38.5 × 65 mm124 parts2LNo license1STM32
Control remoto de silla de ruedas
i3dcor
38.5 × 65 mm123 parts2LAGPL-3.01STM32
VESG
KoJZz
68.2 × 125.3 mm137 parts4LNo license0STM32
Bldc hardware
glocklueng
38.5 × 65 mm124 parts2LNo license0STM32
Skripsi bldc
8qbal
38.5 × 65 mm123 parts2LNo license0STM32
Besc hw
augustbering
39.9 × 97.5 mm120 parts4LNo license0STM32
Bldc hardware-1
koson
82 × 54 mm99 parts2LNo license0STM32
BLDC Driver 4.6
UofSSpaceTeam
75.2 × 49.3 mm112 parts2LNo license5STM32
After remap - Copy
KoJZz
41.2 × 65 mm127 parts4LNo license0STM32
BLDC 4
KoJZz
38.5 × 65 mm123 parts2LNo license0
How designs wire the TC2117
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TC2117 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 7 of 9 designs, most often 100 µF.
- The VI pin has a inductor on 6 of 9 designs, most often 22 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: VCC 100% |
|
| VIpin 3 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BLDC Driver 4.6 by UofSSpaceTeam, E bike conversion kit by ansh1113, Control remoto de silla de ruedas by i3dcor and Electrical by usernamegemaoa.
The TC2117 in open source designs
The gallery holds 11 open source boards using the TC2117 from 9 GitHub repositories; a typical one measures about 39.9 × 65 mm and carries around 123 components.
64% are two-layer designs, the rest use four layers or more, and 9% carry an open source license.
The most starred is BLDC Driver 4.6 by UofSSpaceTeam.
Parts used alongside the TC2117
Microcontrollers on boards using the TC2117
What boards using the TC2117 are built for
TC2117: common questions
Where can I find a TC2117 reference design?
Each of the 11 boards on this page is a real design using the TC2117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TC2117 VI pin?
The VI pin has a decoupling capacitor on 7 of 9 designs, most often 100 µF. Counted from the KiCad layouts of 9 open source designs using the TC2117.
What parts are used alongside the TC2117?
The DRV8302, STM32F40X_LQFP64 and SN65HVD232 appear in the most repositories here.
Which microcontrollers do boards using the TC2117 use?
Most are built on STM32 (11).
How big is a typical board using the TC2117?
The median is 39.9 × 65 mm, and 64% are two-layer designs.
What is the most popular open source board using the TC2117?
By GitHub stars, BLDC Driver 4.6 by UofSSpaceTeam, with 5 stars.
Can I simulate one of these boards using the TC2117 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.