13 open source boards using the TC4428
Real designs built with the TC4428, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
LPC176x MultiFunction
RobertPHeller
156.2 × 168.9 mm223 parts2LCC-BY-4.024ESP32
ESP32-S3-MegaMultiFunction
RobertPHeller
165.1 × 132.1 mm238 parts2LCC-BY-4.03PIC
TurnoutBoss
JimKueneman
164.5 × 86.8 mm207 parts2LNo license1K9HZ 100W 11band LPF-Control
DRWJSCHMIDT
100 × 100 mm150 parts4LNo license18ESP32
ESP32-S3-MultiFunction
RobertPHeller
99.1 × 125.7 mm141 parts2LCC-BY-4.03ESP32
ESP32-D0WD-V3-MultiFunction
RobertPHeller
104.1 × 127 mm137 parts2LCC-BY-4.03TivaMultiFunctionBoard
RobertPHeller
76.2 × 153.7 mm114 parts2LCC-BY-4.024ESP32
ESP32-S3-MultiFunction wroom
RobertPHeller
99.1 × 125.7 mm127 parts2LCC-BY-4.03K9HZ 100W 11band LPF-Control
K0RGI
100 × 100 mm150 parts4LGPL-3.01PocketBeagleMultifuntion
RobertPHeller
128.3 × 139.7 mm111 parts2LCC-BY-4.024ESP32
ESP32-T7S3-MultiFunction
RobertPHeller
99.1 × 125.7 mm116 parts2LCC-BY-4.03ESP32
ESP32-MultiFunction
RobertPHeller
104.1 × 127 mm109 parts2LCC-BY-4.03PocketBeaglePWMHalfSiding+ABSSlave
RobertPHeller
149.9 × 128.3 mm75 parts2LCC-BY-4.024
How designs wire the TC4428
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TC4428 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT_B pin has a capacitor to GND on 3 of 5 designs, most often 100 nF.
- The OUT_A pin has a capacitor to GND on 3 of 5 designs, most often 100 nF.
- The VDD pin has a inductor on 2 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 8 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| OUT_Bpin 5 | Connected to: A connector 80% |
|
| VDDpin 6 | Connected to: TC4428 40%, a connector 40% · 12V 20% |
|
| OUT_Apin 7 | Connected to: A connector 80% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LPC176x MultiFunction by RobertPHeller, K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, ESP32-D0WD-V3-MultiFunction by RobertPHeller and TurnoutBoss by JimKueneman.
The TC4428 in open source designs
The gallery holds 13 open source boards using the TC4428 from 5 GitHub repositories; a typical one measures about 104.1 × 127 mm and carries around 137 components.
85% are two-layer designs, the rest use four layers or more, and 85% carry an open source license.
The most starred is LPC176x MultiFunction by RobertPHeller.
Parts used alongside the TC4428
What boards using the TC4428 are built for
TC4428: common questions
Where can I find a TC4428 reference design?
Each of the 13 boards on this page is a real design using the TC4428. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TC4428 OUT_B pin connected?
The OUT_B pin has a capacitor to GND on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TC4428.
How is the TC4428 OUT_A pin connected?
The OUT_A pin has a capacitor to GND on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TC4428.
How is the TC4428 VDD pin connected?
The VDD pin has a inductor on 2 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TC4428.
What parts are used alongside the TC4428?
The 74HC237, 74HCT00, 74HCT14, AD7991YRJZ and AD8307 appear in the most repositories here.
Which microcontrollers do boards using the TC4428 use?
Most are built on ESP32 (6), NXP (1) and PIC (1).
How big is a typical board using the TC4428?
The median is 104.1 × 127 mm, and 85% are two-layer designs.
What is the most popular open source board using the TC4428?
By GitHub stars, LPC176x MultiFunction by RobertPHeller, with 24 stars.
Can I simulate one of these boards using the TC4428 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.