5 open source boards using the TLV62565DBVR
Real designs built with the TLV62565DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222FPGA
Lesonar2 beamforming rx hardware
tornyol
144.7 × 92.3 mm914 parts6LAGPL-3.0112FPGA
Cp som one
controlpaths
60 × 50 mm83 parts4LMIT22ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01ESP32
Adau1492
fabguitar69690
113 × 77 mm171 parts2LNo license0
How designs wire the TLV62565DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV62565DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a inductor on 5 of 5 designs, most often 2.2 µH.
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
- The FB pin has a resistor to GND on 5 of 5 designs, most often 22 kΩ.
- The FB pin has a pull-up to 1V on 5 of 5 designs, most often 100 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| SWpin 3 | Connected to: Signal 100% |
|
| VINpin 4 | Connected to: 5V 100% |
|
| FBpin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, Lesonar2 beamforming rx hardware by tornyol, Cp som one by controlpaths and FreeDSP-aurora by mischuja.
The TLV62565DBVR in open source designs
The gallery holds 5 open source boards using the TLV62565DBVR from 5 GitHub repositories; a typical one measures about 110 × 92.3 mm and carries around 502 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the TLV62565DBVR
What boards using the TLV62565DBVR are built for
TLV62565DBVR: common questions
Where can I find a TLV62565DBVR reference design?
Each of the 5 boards on this page is a real design using the TLV62565DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV62565DBVR SW pin connected?
The SW pin has a inductor on 5 of 5 designs, most often 2.2 µH. Counted from the KiCad layouts of 5 open source designs using the TLV62565DBVR.
What decoupling capacitors do designs use on the TLV62565DBVR VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the TLV62565DBVR.
What resistor goes on the TLV62565DBVR FB pin?
The FB pin has a resistor to GND on 5 of 5 designs, most often 22 kΩ. Counted from the KiCad layouts of 5 open source designs using the TLV62565DBVR.
What parts are used alongside the TLV62565DBVR?
The 25AA1024T-I/SM, ADAU1452WBCPZ, ADM811TARTZ-REEL, CS2100CP-CZZ and ESP32-WROOM-32U appear in the most repositories here.
Which microcontrollers do boards using the TLV62565DBVR use?
Most are built on ESP32 (3) and FPGA (2).
How big is a typical board using the TLV62565DBVR?
The median is 110 × 92.3 mm, and 60% are two-layer designs.
What is the most popular open source board using the TLV62565DBVR?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the TLV62565DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.