7 open source boards using the TPD4E1U06DCKR

Real designs built with the TPD4E1U06DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The TPD4E1U06DCKR in open source designs

The gallery holds 7 open source boards using the TPD4E1U06DCKR from 5 GitHub repositories; a typical one measures about 100 × 110 mm and carries around 262 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Cm4 motherboard by Twisted-Fields.

Microcontrollers on boards using the TPD4E1U06DCKR

What boards using the TPD4E1U06DCKR are built for

TPD4E1U06DCKR: common questions

Where can I find a TPD4E1U06DCKR reference design?

Each of the 7 boards on this page is a real design using the TPD4E1U06DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPD4E1U06DCKR?

The ADS1115IDGSR, CA-IS3050G, ET6226M, FJ5461AH and FT231XS-R appear in the most repositories here.

Which microcontrollers do boards using the TPD4E1U06DCKR use?

Most are built on STM32 (5) and Raspberry Pi (2).

How big is a typical board using the TPD4E1U06DCKR?

The median is 100 × 110 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPD4E1U06DCKR?

By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.

Can I simulate one of these boards using the TPD4E1U06DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part