3 open source boards using the TPD6S300RUKR

Real designs built with the TPD6S300RUKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The TPD6S300RUKR in open source designs

The gallery holds 3 open source boards using the TPD6S300RUKR from 3 GitHub repositories; a typical one measures about 130 × 89 mm and carries around 772 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is Thin laptop cm5-usb left by CopperPilot.

Microcontrollers on boards using the TPD6S300RUKR

What boards using the TPD6S300RUKR are built for

TPD6S300RUKR: common questions

Where can I find a TPD6S300RUKR reference design?

Each of the 3 boards on this page is a real design using the TPD6S300RUKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPD6S300RUKR?

The 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT, INA226AIDGSR and INA237AIDGSR appear in the most repositories here.

Which microcontrollers do boards using the TPD6S300RUKR use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the TPD6S300RUKR?

The median is 130 × 89 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPD6S300RUKR?

By GitHub stars, Thin laptop cm5-usb left by CopperPilot, with 1 stars.

Can I simulate one of these boards using the TPD6S300RUKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part