8 open source boards using the TPS62933FDRLR
Real designs built with the TPS62933FDRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Harpia
todio1155
93.6 × 93.8 mm182 parts6LCERN-OHL-S-2.01RP2040/RP2350
Odeck
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00RP2040/RP2350
Odock
KarpelesLab
130 × 89 mm772 parts6LCERN-OHL-P-2.00FE UFPR 4 0
josearistidesbail
159.6 × 130 mm313 parts4LNo license0ESP32
DroneMagNav2.0
ajisrawi
128 × 84 mm218 parts4LCustom license0ESP32
SGW01
ymhtwe
69 × 69 mm127 parts2LNo license0ESP32
Esp32-p4-cam
momszx
45 × 45 mm72 parts4LNo license0STM32
Droneboard
nikola825
38 × 38 mm63 parts4LMIT3
How designs wire the TPS62933FDRLR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS62933FDRLR connects to, and the resistors, capacitors and other passives placed on it.
- The SW_5 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 3.3 µH).
- The SS_7 pin has a capacitor to GND on 8 of 8 designs, most often 33 nF (then 22 nF).
- The VIN_3 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The SW_5 pin has a series capacitor on 6 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RT_1pin 1 | Connected to: GND 75% · a signal 25% | — |
| EN_2pin 2 | Connected to: Signal 50% · not connected 25% · 3.3V 25% |
|
| VIN_3pin 3 | Connected to: 5V 88% |
|
| GND_4pin 4 | Connected to: GND 100% | — |
| SW_5pin 5 | Connected to: Signal 75% · 3.3V 25% |
|
| BST_6pin 6 | Connected to: Signal 75% · 3.3V 25% |
|
| SS_7pin 7 | Connected to: Signal 75% · 3.3V 25% |
|
| FB_8pin 8 | Connected to: Signal 75% · 3.3V 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Droneboard by nikola825, Harpia by todio1155, DroneMagNav2.0 by ajisrawi and FE UFPR 4 0 by josearistidesbail.
The TPS62933FDRLR in open source designs
The gallery holds 8 open source boards using the TPS62933FDRLR from 8 GitHub repositories; a typical one measures about 110.8 × 86.5 mm and carries around 200 components.
88% use four copper layers or more, and 50% carry an open source license.
The most starred is Droneboard by nikola825.
Parts used alongside the TPS62933FDRLR
Microcontrollers on boards using the TPS62933FDRLR
What boards using the TPS62933FDRLR are built for
TPS62933FDRLR: common questions
Where can I find a TPS62933FDRLR reference design?
Each of the 8 boards on this page is a real design using the TPS62933FDRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS62933FDRLR SW_5 pin connected?
The SW_5 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 3.3 µH). Counted from the KiCad layouts of 8 open source designs using the TPS62933FDRLR.
How is the TPS62933FDRLR SS_7 pin connected?
The SS_7 pin has a capacitor to GND on 8 of 8 designs, most often 33 nF (then 22 nF). Counted from the KiCad layouts of 8 open source designs using the TPS62933FDRLR.
What decoupling capacitors do designs use on the TPS62933FDRLR VIN_3 pin?
The VIN_3 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TPS62933FDRLR.
What parts are used alongside the TPS62933FDRLR?
The AMS1117-3.3, TPS259470ARPWR, 74LVC1G17W5-7, AT24C512C-SSHD-T and CYPM1321-97BZXIT appear in the most repositories here.
Which microcontrollers do boards using the TPS62933FDRLR use?
Most are built on ESP32 (3), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the TPS62933FDRLR?
The median is 110.8 × 86.5 mm, and 13% are two-layer designs.
What is the most popular open source board using the TPS62933FDRLR?
By GitHub stars, Droneboard by nikola825, with 3 stars.
Can I simulate one of these boards using the TPS62933FDRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.