15 open source boards using the TS1117BCW33_RPG
Real designs built with the TS1117BCW33_RPG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView base
Pytonballoon810
81.2 × 81.2 mm81 parts2LApache-2.02View base
DxnnySch
81.2 × 81.2 mm81 parts2LApache-2.00View base
Konn1nn
81.2 × 81.2 mm81 parts2LMIT0View base
LeoCheung0804
81.2 × 81.2 mm81 parts2LApache-2.00View base
Liesegang
81.2 × 81.2 mm81 parts2LApache-2.00View base
Moonlight17
81.2 × 81.2 mm81 parts2LApache-2.00View base
Tr-T59
81.2 × 81.2 mm81 parts2LApache-2.00View base
chris-hemmings
81.2 × 81.2 mm81 parts2LApache-2.00View base
Qtejada
81.2 × 81.2 mm81 parts2LApache-2.00View base
toastedcrumpets
81.2 × 81.2 mm81 parts2LApache-2.00View base
camerakang
81.2 × 81.2 mm81 parts2LApache-2.00View base
knurtz
81.2 × 81.2 mm78 parts2LApache-2.00ESP32
Serre
RubisCatty
57.7 × 41 mm58 parts4LNo license0View base
PROJECT-BIRO
81.2 × 81.2 mm81 parts2LMIT1
How designs wire the TS1117BCW33_RPG
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TS1117BCW33_RPG connects to, and the resistors, capacitors and other passives placed on it.
- The OUTPUT pin is tied to 3.3V on 14 of 15 designs.
- The INPUT pin is tied to 5V on 14 of 15 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| OUTPUTpin 2 | Connected to: 3.3V 93% | — |
| INPUTpin 3 | Connected to: 5V 93% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include View base by scottbez1, View base by Pytonballoon810, View base by PROJECT-BIRO and View base by camerakang.
The TS1117BCW33_RPG in open source designs
The gallery holds 15 open source boards using the TS1117BCW33_RPG from 15 GitHub repositories; a typical one measures about 81.2 × 81.2 mm and carries around 81 components.
93% are two-layer designs, the rest use four layers or more, and 93% carry an open source license.
The most starred is View base by scottbez1.
Parts used alongside the TS1117BCW33_RPG
Microcontrollers on boards using the TS1117BCW33_RPG
What boards using the TS1117BCW33_RPG are built for
TS1117BCW33_RPG: common questions
Where can I find a TS1117BCW33_RPG reference design?
Each of the 15 boards on this page is a real design using the TS1117BCW33_RPG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TS1117BCW33_RPG OUTPUT pin connected?
The OUTPUT pin is tied to 3.3V on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TS1117BCW33_RPG.
How is the TS1117BCW33_RPG INPUT pin connected?
The INPUT pin is tied to 5V on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the TS1117BCW33_RPG.
What parts are used alongside the TS1117BCW33_RPG?
The AP2114HA-3.3, CH340C, HX711, MT6701-CT and SN74LV1T34DBV appear in the most repositories here.
Which microcontrollers do boards using the TS1117BCW33_RPG use?
Most are built on ESP32 (1).
How big is a typical board using the TS1117BCW33_RPG?
The median is 81.2 × 81.2 mm, and 93% are two-layer designs.
What is the most popular open source board using the TS1117BCW33_RPG?
By GitHub stars, View base by scottbez1, with 22,165 stars.
Can I simulate one of these boards using the TS1117BCW33_RPG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.