20 open source boards using the T-Micro32_Plus

Real designs built with the T-Micro32_Plus, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the T-Micro32_Plus

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the T-Micro32_Plus connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 20 of 20 designs, most often 1 µF.
  • The EN pin has a pull-up to 3.3V on 20 of 20 designs, most often 10 kΩ.
  • The IO32 pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ.
  • The IO33 pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ.
GNDpin 1, 15, 38Connected to: GND 100%
3V3pin 2Connected to: 3.3V 100%
ENpin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (20)
  • Pull-up to 3.3V on 100% · 10 kΩ (20)
IO39/SVNpin 5Connected to: Not connected 100%
IO34pin 6Connected to: Not connected 100%
IO35pin 7Connected to: Not connected 100%
IO32pin 8Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO33pin 9Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO25pin 10Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO26pin 11Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO27pin 12Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO12pin 14Connected to: TMC6300 100%
  • Resistor to GND on 100% · 10 kΩ (20)
IO13pin 16Connected to: MT6701-CT 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (20)
IO37pin 17Connected to: MT6701-CT 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (20)
NCpin 19, 20, 27, 30, 37Connected to: Not connected 100%
IO8pin 22Connected to: VEML7700 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (20)
IO15pin 23Connected to: VEML7700 100%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (20)
VDD_SDIOpin 32Connected to: Not connected 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include View base by scottbez1, View base by Pytonballoon810, View base by PROJECT-BIRO and View base by Ambition-muzi.

The T-Micro32_Plus in open source designs

The gallery holds 20 open source boards using the T-Micro32_Plus from 20 GitHub repositories; a typical one measures about 81.2 × 81.2 mm and carries around 81 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is View base by scottbez1.

What boards using the T-Micro32_Plus are built for

T-Micro32_Plus: common questions

Where can I find a T-Micro32_Plus reference design?

Each of the 20 boards on this page is a real design using the T-Micro32_Plus. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the T-Micro32_Plus EN pin connected?

The EN pin has a capacitor to GND on 20 of 20 designs, most often 1 µF. Counted from the KiCad layouts of 20 open source designs using the T-Micro32_Plus.

What resistor goes on the T-Micro32_Plus IO32 pin?

The IO32 pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ. Counted from the KiCad layouts of 20 open source designs using the T-Micro32_Plus.

What resistor goes on the T-Micro32_Plus IO33 pin?

The IO33 pin has a resistor to GND on 20 of 20 designs, most often 10 kΩ. Counted from the KiCad layouts of 20 open source designs using the T-Micro32_Plus.

What parts are used alongside the T-Micro32_Plus?

The AP2114HA-3.3, CH340C, HX711, MT6701-CT and SN74LV1T34DBV appear in the most repositories here.

How big is a typical board using the T-Micro32_Plus?

The median is 81.2 × 81.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the T-Micro32_Plus?

By GitHub stars, View base by scottbez1, with 22,165 stars.

Can I simulate one of these boards using the T-Micro32_Plus before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part