11 open source boards using the WeMos_S2_mini

Real designs built with the WeMos_S2_mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the WeMos_S2_mini

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the WeMos_S2_mini connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin is left unconnected on 73% of them (a signal on 3).
  • The 3V3 pin is tied to 3.3V on 73% of them (not connected on 2).
  • The GPIO37 pin is left unconnected on 7 of 10 designs (a signal on 3).
  • The XTAL_32K_N pin is left unconnected on 6 of 10 designs (a signal on 4).
ENpin 1Connected to: Not connected 73% · a signal 27%
IO5pin 3Connected to: Not connected 50% · a signal 50%
  • Series resistor on 30% · 1 kΩ (2), 100 kΩ (1), 3.9 kΩ (1)
IO9pin 5Connected to: Signal 60% · not connected 40%
  • Series resistor on 30% · 1 kΩ (2), 1.5 kΩ (1), 100 Ω (1)
GPIO12pin 7Connected to: A connector 20% · not connected 30%
  • Series resistor on 30% · 100 Ω (2), 1 kΩ (2)
3V3pin 8Connected to: 3.3V 73% · not connected 18%
GNDpin 10, 26Connected to: GND 75% · a signal 15%
XTAL_32K_Npin 11Connected to: Not connected 60% · a signal 40%
GPIO37pin 15Connected to: Not connected 70% · a signal 30%
GPIO1pin 17Connected to: Signal 89%
  • Series resistor on 44% · 1 kΩ (2), 12 kΩ (1), 150 Ω (1)
GPIO2pin 18Connected to: TFT_ST7735_SD 22% · not connected 22%
  • Series resistor on 44% · 1 kΩ (2), 12 kΩ (1), 150 Ω (1)
GPIO6pin 20Connected to: TFT_ST7735_SD 25% · not connected 38%
  • Series resistor on 38% · 1 kΩ (3), 100 Ω (1)
GPIO8pin 21Connected to: Not connected 56% · a signal 44%
  • Series resistor on 33% · 1 kΩ (2), 120 Ω (1), 100 Ω (1)
GPIO14pin 24Connected to: Not connected 63% · a signal 38%
XTAL_32K_Ppin 25Connected to: Not connected 63% · a signal 38%
DAC_1pin 27Connected to: TFT_ST7735_SD 25% · not connected 25%
  • Series resistor on 38% · 100 Ω (2), 1 kΩ (2)
GPIO34pin 29Connected to: Not connected 63% · a signal 38%

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Weather dash by hackclub, SolarWeatherStation by rbat05, Esp20A80V by RoboDurden and WifiPowerbutton by Bouni.

The WeMos_S2_mini in open source designs

The gallery holds 11 open source boards using the WeMos_S2_mini from 10 GitHub repositories; a typical one measures about 61 × 46 mm and carries around 15 components.

91% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.

The most starred is Weather dashboard by hackclub.

Parts used alongside the WeMos_S2_mini

WeMos_S2_mini: common questions

Where can I find a WeMos_S2_mini reference design?

Each of the 11 boards on this page is a real design using the WeMos_S2_mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the WeMos_S2_mini EN pin connected?

The EN pin is left unconnected on 73% of them (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the WeMos_S2_mini.

How is the WeMos_S2_mini 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 73% of them (not connected on 2). Counted from the KiCad layouts of 10 open source designs using the WeMos_S2_mini.

How is the WeMos_S2_mini GPIO37 pin connected?

The GPIO37 pin is left unconnected on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the WeMos_S2_mini.

How big is a typical board using the WeMos_S2_mini?

The median is 61 × 46 mm, and 91% are two-layer designs.

What is the most popular open source board using the WeMos_S2_mini?

By GitHub stars, Weather dashboard by hackclub, with 11 stars.

Can I simulate one of these boards using the WeMos_S2_mini before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part