5 open source boards using the 8MHZ
Real designs built with the 8MHZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051
STM32GPS-Tracker
mohamedboubaker
35 × 53 mm53 parts2LNo license40
STM32Battery-Powered-STM32-Board-With-USB
50 × 50 mm48 parts2LMIT13
STM32Custom-STM32-PCB-With
52 × 52 mm37 parts2LNo license2
MUTIF09 Single Board Computer
ja1umi
155 × 114 mm68 parts2LMIT10
The 8MHZ in open source designs
The gallery holds 5 open source boards using the 8MHZ from 5 GitHub repositories; a typical one measures about 52 × 53 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Zeta sbc by skiselev.
Parts used alongside the 8MHZ
Microcontrollers on boards using the 8MHZ
What boards using the 8MHZ are built for
8MHZ: common questions
Where can I find a 8MHZ reference design?
Each of the 5 boards on this page is a real design using the 8MHZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 8MHZ?
The 100N, 10N, 10P, 10U and 30P appear in the most repositories here.
Which microcontrollers do boards using the 8MHZ use?
Most are built on STM32 (3).
How big is a typical board using the 8MHZ?
The median is 52 × 53 mm, and 100% are two-layer designs.
What is the most popular open source board using the 8MHZ?
By GitHub stars, Zeta sbc by skiselev, with 51 stars.
Can I simulate one of these boards using the 8MHZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.