8 open source boards using the BMM150
Real designs built with the BMM150, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRFAWatch2-hw
jwise
73.4 × 72.7 mm157 parts4LNo license18
RP2040/RP2350MuHack-Badge
MrMoDDoM
100 × 100 mm117 parts2LAGPL-3.08
STM32ProPrj Project Ignis 2026-06-03
Shourya-x
123.2 × 67.9 mm71 parts2LNo license3
STM32Icarus
nnarain
37.1 × 43.3 mm43 parts4LNo license1
STM32CC M7
OzanE1
40 × 65 mm126 parts4LLGPL-2.10
STM32CC M7
40 × 65 mm123 parts4LLGPL-2.10
RP2040/RP2350Quad0
Person-0
60 × 50 mm81 parts4LNo license0
Multi-Sensor
AungChoOo
23 × 35 mm21 parts4LMIT0
The BMM150 in open source designs
The gallery holds 8 open source boards using the BMM150 from 8 GitHub repositories; a typical one measures about 50 × 65 mm and carries around 99 components.
75% use four copper layers or more, and 50% carry an open source license.
The most starred is AWatch2-hw by jwise.
Parts used alongside the BMM150
Microcontrollers on boards using the BMM150
What boards using the BMM150 are built for
BMM150: common questions
Where can I find a BMM150 reference design?
Each of the 8 boards on this page is a real design using the BMM150. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BMM150?
The AMS1117-3.3, BMI088, BMP388, BMP581 and IIM-42652 appear in the most repositories here.
Which microcontrollers do boards using the BMM150 use?
Most are built on STM32 (4), RP2040/RP2350 (2) and Nordic nRF (1).
How big is a typical board using the BMM150?
The median is 50 × 65 mm, and 25% are two-layer designs.
What is the most popular open source board using the BMM150?
By GitHub stars, AWatch2-hw by jwise, with 18 stars.
Can I simulate one of these boards using the BMM150 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.