6 open source boards using the EMC2301-1-ACZL-TR
Real designs built with the EMC2301-1-ACZL-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32BB3plus mainboard
eez-open
233 × 230.5 mm353 parts4LTAPR-OHL-1.012
Raspberry PiCM4IOv5-clone
sergiomd4
160 × 90 mm137 parts4LCC0-1.010
STM32Benchy Motherboard - AM625
Daxxn
300 × 120 mm990 parts8LAGPL-3.02
Raspberry PiCM4IOv5
wang-edward
160 × 90 mm137 parts4LMIT5
STM32BB3plus USB hub test
144.5 × 103 mm223 parts4LTAPR-OHL-1.012
STM32BenchyMotherBoard-PI
205 × 130 mm590 parts6LAGPL-3.02
The EMC2301-1-ACZL-TR in open source designs
The gallery holds 6 open source boards using the EMC2301-1-ACZL-TR from 4 GitHub repositories; a typical one measures about 182.5 × 111.5 mm and carries around 288 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is BB3plus mainboard by eez-open.
Parts used alongside the EMC2301-1-ACZL-TR
Microcontrollers on boards using the EMC2301-1-ACZL-TR
What boards using the EMC2301-1-ACZL-TR are built for
EMC2301-1-ACZL-TR: common questions
Where can I find a EMC2301-1-ACZL-TR reference design?
Each of the 6 boards on this page is a real design using the EMC2301-1-ACZL-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the EMC2301-1-ACZL-TR?
The 74LVC1G07SE-7, AP22653W6, AP64501SP-13, FSUSB42MUX and MagJack-A70-112-331N126 appear in the most repositories here.
Which microcontrollers do boards using the EMC2301-1-ACZL-TR use?
Most are built on STM32 (4) and Raspberry Pi (2).
How big is a typical board using the EMC2301-1-ACZL-TR?
The median is 182.5 × 111.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the EMC2301-1-ACZL-TR?
By GitHub stars, BB3plus mainboard by eez-open, with 12 stars.
Can I simulate one of these boards using the EMC2301-1-ACZL-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.