18 open source boards using the ESP32-S3-WROOM-1-N8
Real designs built with the ESP32-S3-WROOM-1-N8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Open-ESPilot
Tomas-Kuchta-FPV
50.6 × 71.1 mm98 parts2LCERN-OHL-W-2.018
ESP32Cinread-IT8951 S3 HAT
martinberlin
83.2 × 42.1 mm54 parts2LCERN-OHL-W-2.012
ESP32Chatgpt astra test2
fredriknk
100 × 80 mm90 parts4LMIT3
ESP32Esp32Tap - ESP32-S3 Precor serial bus tap
scottmsilver
95 × 58 mm76 parts4LNo license2
ESP32Esp32s3-plant monitor
MuffinByteLabs
62.5 × 44.5 mm51 parts4LCERN-OHL-P-2.02- schematic only · 40 partsESP32
Moto Audio
bacnbit
40 partsNo license2 
ESP32SnakeTank
vpolda
80.8 × 37.1 mm46 parts4LNo license1
ESP32Nescart
Keitark
99.7 × 63.9 mm84 parts6LMIT0
ESP32Quake sensor
ismailcelik-tr
65 × 58 mm54 parts2LNo license0
ESP32Race tracker
jonaschramm
56.1 × 65.5 mm49 parts4LNo license0
ESP32GlucoBit
jdharcourt
55 × 30.4 mm43 parts4LNo license0
ESP32SmartWateringFlowerPot
Chrissyuh
61.9 × 80.9 mm25 parts2LMIT0
ESP32PiZeroHat
65 × 45 mm9 parts2LNo license2
ESP32SnakeTank 4 sig pwr gnd sig
80.5 × 42.7 mm46 parts4LNo license1
ESP32Nescart fc Rev A-FC
90 × 66.8 mm80 parts6LMIT0
ESP32Sensor data logger
mrcha033
70 × 50 mm16 parts2LApache-2.02
ESP32Bench sensor logger usb 5eab0a5d
70 × 50 mm14 parts2LApache-2.02
ESP32Bench sensor logger usb b204035a
70 × 50 mm14 parts2LApache-2.02
The ESP32-S3-WROOM-1-N8 in open source designs
The gallery holds 18 open source boards using the ESP32-S3-WROOM-1-N8 from 13 GitHub repositories; a typical one measures about 70 × 50 mm and carries around 48 components.
53% use four copper layers or more, and 56% carry an open source license.
The most starred is Open-ESPilot by Tomas-Kuchta-FPV.
Parts used alongside the ESP32-S3-WROOM-1-N8
Microcontrollers on boards using the ESP32-S3-WROOM-1-N8
What boards using the ESP32-S3-WROOM-1-N8 are built for
ESP32-S3-WROOM-1-N8: common questions
Where can I find a ESP32-S3-WROOM-1-N8 reference design?
Each of the 18 boards on this page is a real design using the ESP32-S3-WROOM-1-N8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-S3-WROOM-1-N8?
The USBLC6-2SC6, AMS1117-3.3, MCP73831T-2ACI/OT and AP2112K-3.3TRG1 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-WROOM-1-N8 use?
Most are built on ESP32 (18).
How big is a typical board using the ESP32-S3-WROOM-1-N8?
The median is 70 × 50 mm, and 47% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM-1-N8?
By GitHub stars, Open-ESPilot by Tomas-Kuchta-FPV, with 18 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM-1-N8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.