8 open source boards using the MCP2515-XSO
Real designs built with the MCP2515-XSO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Dual CPU Base Board
Twisted-Fields
94.4 × 72.8 mm247 parts4LCustom license417
AVR/ArduinoNodo BMS
AugustoS97
149.2 × 83.7 mm107 parts2LGPL-3.07
Microchip SAMTesting hardware
ParadigmHyperloop
220 × 145.5 mm336 parts2LCustom license1
RP2040/RP2350PixApple
mrkingseasheep
50 × 35 mm66 parts4LGPL-3.01
TJA1055-3-Breakout-Board
korni92
44.5 × 53.5 mm38 parts2LNo license1
AVR/ArduinoMódulo RS485 a CAN para EP-SOLAR
80 × 55.6 mm42 parts2LGPL-3.07
AVR/ArduinoCAN2Serial
67.3 × 52.1 mm33 parts2LGPL-3.07
RP2040/RP2350Dashboard vcu
chrskly
82.6 × 100.6 mm26 parts2LNo license2
The MCP2515-XSO in open source designs
The gallery holds 8 open source boards using the MCP2515-XSO from 6 GitHub repositories; a typical one measures about 81.3 × 64.2 mm and carries around 54 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Dual CPU Base Board by Twisted-Fields.
Parts used alongside the MCP2515-XSO
Microcontrollers on boards using the MCP2515-XSO
What boards using the MCP2515-XSO are built for
MCP2515-XSO: common questions
Where can I find a MCP2515-XSO reference design?
Each of the 8 boards on this page is a real design using the MCP2515-XSO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2515-XSO use?
Most are built on AVR/Arduino (3), RP2040/RP2350 (3) and Microchip SAM (1).
How big is a typical board using the MCP2515-XSO?
The median is 81.3 × 64.2 mm, and 75% are two-layer designs.
What is the most popular open source board using the MCP2515-XSO?
By GitHub stars, Dual CPU Base Board by Twisted-Fields, with 417 stars.
Can I simulate one of these boards using the MCP2515-XSO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.