12 open source boards using the NCP1117ST50T3G
Real designs built with the NCP1117ST50T3G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoArduino ads129x
OpenElectronicsLab
197 × 71 mm267 partsGPL-3.0102
AVR/ArduinoArduino MEGA 2560-Rev3
bobc
101.6 × 53.3 mm69 partsNo license22
STM32Ethernetcnc
pekkaroi
73 × 100 mm94 parts2LGPL-2.015
MicroBBPS
stasiselectronics
54 × 24 mm21 parts2LNo license14
AVR/ArduinoBzzt Keyboard Controller Board
SteveCooling
166 × 70 mm71 parts2LMIT8
AVR/ArduinoBeetje 32U4 Blok
aspro648
68.6 × 53.3 mm33 parts2LNo license8
Microchip SAMOSSW - Open Scart Switch - Main
BinaryS010
401.6 × 130.1 mm310 parts4LGPL-3.07
AVR/ArduinoUNO-TH Rev3e
humancomputerintegration
84.5 × 66.5 mm118 parts2LGPL-3.03
PICPic32mz board
martinribelotta
79 × 68 mm28 parts2LNo license3
AVR/ArduinoArduino Uno Rev3-02-TH
68.6 × 53.3 mm57 partsNo license22
AVR/ArduinoMotherboard
ParadigmHyperloop
196.4 × 195.1 mm262 parts2LCustom license11
STM32To220 powerstage
rene-dev
99.8 × 74.9 mm125 parts4LGPL-3.0979
The NCP1117ST50T3G in open source designs
The gallery holds 12 open source boards using the NCP1117ST50T3G from 11 GitHub repositories; a typical one measures about 92.2 × 69 mm and carries around 83 components.
78% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is To220 powerstage by rene-dev.
Parts used alongside the NCP1117ST50T3G
Microcontrollers on boards using the NCP1117ST50T3G
What boards using the NCP1117ST50T3G are built for
NCP1117ST50T3G: common questions
Where can I find a NCP1117ST50T3G reference design?
Each of the 12 boards on this page is a real design using the NCP1117ST50T3G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NCP1117ST50T3G?
The LMV358IDGKR, LP2985-33DBVR, NCP1117ST33T3G, ATMEGA16U2-MU(R) and ATMEGA32U4-AUR appear in the most repositories here.
Which microcontrollers do boards using the NCP1117ST50T3G use?
Most are built on AVR/Arduino (7), STM32 (2), PIC (1) and Microchip SAM (1).
How big is a typical board using the NCP1117ST50T3G?
The median is 92.2 × 69 mm, and 78% are two-layer designs.
What is the most popular open source board using the NCP1117ST50T3G?
By GitHub stars, To220 powerstage by rene-dev, with 979 stars.
Can I simulate one of these boards using the NCP1117ST50T3G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.